“struct rte_ether_hdr” 是一个数据结构,用于表示以太网帧的头部。它是由DPDK(Data Plane Development Kit)网络库定义的,用于高性能网络应用程序开发。 在C语言中,结构体的定义如下: structrte_ether_hdr{ uint8_tdst_addr[ETHER_ADDR_LEN]; uint8_tsrc_addr[ETHER_ADDR_LEN]; uint16_tether_type; }; ...
structether_header { u_int8_t ether_dhost[ETH_ALEN]; // destination eth addr u_int8_t ether_shost[ETH_ALEN]; // source ether addr u_int16_t ether_type; // packet type ID field } __attribute__ ((__packed__)); ***IP的结构*** structiphdr { #if __BYTE_ORDER == __LITT...
struct ethhdr { unsigned char h_dest[ETH_ALEN]; unsigned char h_source[ETH_ALEN]; __be16 h_proto; } __attribute__((packed)); struct ether_header { u_int8_t ether_dhost[ETH_ALEN]; // destination eth addr u_int8_t ether_shost[ETH_ALEN]; // source ether addr u_int16_t et...
获取UDP 头部:在你的代码中,struct rte_udp_hdr *udphdr = (struct rte_udp_hdr *)(iphdr + 1);是不正确的,因为iphdr是一个指向 IPv4 头的指针,而加法运算会根据其类型(即struct rte_ipv4_hdr *的大小)来进行,这并不是想要得到 UDP 头的正确方式。 使用适当的偏移量:你应该使用sizeof(struct rte_ipv...
struct tcphdr { u_int16_t source; u_int16_t dest; u_int32_t seq; u_int32_t ack_seq; # if __BYTE_ORDER == __LITTLE_ENDIAN u_int16_t res1:4; u_int16_t doff:4; u_int16_t fin:1; u_int16_t syn:1; u_int16_t rst:1; ...
本文档介绍如何了解Catalyst 9000系列交换机上的EtherChannel并对其进行故障排除。 先决条件 要求 Cisco 建议您了解以下主题: Catalyst 9000系列交换机架构 Cisco IOS® XE软件架构 链路聚合控制协议 (LACP) 和端口聚合协议 (PAgP) 使用的组件 本文档中的信息基于以下硬件版本: ...
EtherChannel在交換機、路由器和伺服器之間提供容錯高速鏈路。 使用EtherChannel增加裝置之間的頻寬,並將其部署到網路中可能發生瓶頸的任何位置。EtherChannel為鏈路丟失提供自動恢復,它將負載重新分配到其餘鏈路。如果鏈路發生故障,EtherChannel會將來自故障鏈路的流量重定向到通道中的其餘鏈路,無需干預。
首先,从接收到的mbuf中提取出IP头(rte_ipv4_hdr* iphdr)和TCP头(rte_tcp_hdr* tcphdr)。这里使用了DPDK库函数rte_pktmbuf_mtod_offset()来获取指向特定位置的指针。 接下来,保存当前的TCP校验和值,并将校验和字段置为0。然后通过调用rte_ipv4_udptcp_cksum()计算新的TCP校验和,并与之前保存的值进行比较,以...
介绍完目前主流机内互联,我们继续看一看机间互联。在 ADGX A100 系列,每个节点上 8 张 GPU 通过 NVLink 和 NVSwitch 互联,机间直接用 200G IB HDR 网络互联。 到了DGX H100,NVIDIA 把机内的 NVSwitch 做到交换机上,叫做 NVLink Switch[22],这几个称呼比较容易混淆,注意区分,NVSwitch 是机内的交换,NVLink...
}#ifPING_USE_SOCKETS/* Ping using the socket ip */staticerr_tping_send(ints,constip_addr_t*addr){interr;structicmp_echo_hdr*iecho;structsockaddr_storageto;size_tping_size =sizeof(struct icmp_echo_hdr) + PING_DATA_SIZE;LWIP_ASSERT("ping_size is too big", ping_size <=0xffff);#ifLW...