Evaporation Rate (n-butyl acetate=1.0)0.0026 Flash Point, Closed Cup121 °C Freezing Point °F(°C)-108 (-78) Hansen Solubility Parameter, dD (joules/cm3)1/215.1 Hansen Solubility Parameter, dH (joules/cm3)1/28.7 Hansen Solubility Parameter, dP (joules/cm3)1/22.5 ...
Evaporation Rate (n-butyl acetate=1.0)0.62 Flash Point, Closed Cup31 °C Freezing Point °F(°C)-141 (-96) Hansen Solubility Parameter, dD (joules/cm3)1/215.6 Hansen Solubility Parameter, dH (joules/cm3)1/213.6 Hansen Solubility Parameter, dP (joules/cm3)1/27.2 ...
Evaporation Rate 37.5 Water Solubility 69 g/L (20 ºC) FreezingPoint -116.3℃ Merck 14,3806 Henry's Law Constant 12.50(x 10-4 atm?m3/mol at 25 °C) (Signer et al., 1969) Dielectric constant 4.0(40℃) Exposure limits TLV-TWA 1200 mg/m3 (400 ppm) (ACGIH and OSHA); ...
Medium evaporation rate Miscible with water and most organic liquids Non-HAP Non-SARA Readily biodegradable Product description Eastman™ PM Solvent (Propylene Glycol Monomethyl Ether), a medium-boiling glycol ether, is an active solvent for cellulose acetate butyrate, nitrocellulose, epoxy, phenolic,...
Evaporation Rate 10 explosive limit 8% Water Solubility Insoluble in water. λmax λ: 210 nm Amax: 1.00λ: 220 nm Amax: 0.30λ: 230 nm Amax: 0.10λ: 240 nm Amax: 0.05λ: 260-400 nm Amax: 0.01 Merck 14,5489 Exposure limits TLV-TWA 300 ppm (～1350 mg/m3) (ACGIH), 75 ...
Slow evaporation rate Product description Eastman™ DB Solvent, Stabilized is a high boiling glycol ether used in baking enamels to promote increased flow-out and leveling in paint films. It is also used in printing inks when very slow drying is desired. In textile dyeing, it p...
Evaporation Rate0.02 explosive limit1.8-12.2%(V) Water SolubilityMiscible SensitiveHygroscopic Merck14,1800 BRN1736441 StabilityStable. Combustible. Note wide explosion limits. Incompatible with strong oxidizing agents, strong acids, acid chlorides, acid anhydrides. Hygroscopic. ...
Evaporation rateNo data available Flammability (solid, gas)No data available Upper/lower flammability or explosive limitsNo data available Vapour pressureNo data available Vapour densityNo data available Relative density0,959 g/cm3 at 25 °C Water solubilityNo data available Partition coefficient: n-oc...
High boiling point, miscibility good, moderate evaporation rate, excellent coalescence and coupling ability of the paint coating to improve leveling, gloss, fullness efficacy of excellence, to avoid solvent "blast hole", from the orange peel, crack, cracking and other surface defects, the coating ...
Introduction of DEE into the cylinder can be done in 2 ways, first one is by injecting DEE into the inlet manifold and the other one is by carburetion principle. For the carburetion technique, the evaporation rate of DEE (Di-Ethyl-Ether) is to be controlled by using "venturi" of proper...