最后通过脚本收集全部系统日志,从日志中发现一些有用的信息:每次加载网卡驱动时都有一个报错 kernel: bnx2 0000:0b:00.0: Firmware not running, aborting. 貌似网卡异常。想到一个终极办法:彻底断电5分钟。 正和我想象的一样,断电5分钟再次启动系统,网络正常。 总结:因为突然断电造成网卡异常,这种异常lspci能看到网...
status为unmanaged,则该网卡未被NetworkManager管理,恢复的方法如下: nmclideviceseteth0managedyes 重启NetworkManager...NetworkManager的状态为dead(如果状态为running,则执行b步骤),则NetowrkManager未启动,检查该服务是否开机自启,请执行以下命令: systemctl is-enabled centOS7.5 启动网络(service network restart)报错解决...
学习《鸟哥的私房菜》正规表示法时,利用/sbin/ifconfig eth0查ip时出现错误提示:eth0: error fetching interface information: Device not found我用ifconfig内容显示如下:lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txq...
shell>cd/etc/sysconfig/network-scripts/shell> mv ifcfg-eth0 ifcfg-eth1shell> vi ifcfg-eth1---DEVICE=eth1TYPE=EthernetONBOOT=yesNM_CONTROLLED=yesBOOTPROTO=noneIPADDR=192.168.150.32PREFIX=24GATEWAY=192.168.150.2DNS1=192.168.150.2DEFROUTE=yesIPV4_FAILURE_FATAL=yesIPV6INIT=noNAME="System eth1"---...
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]; 原因是copy虚拟机造成的。使用vmworkstation打开虚拟机的时候,要选择copy而非move。 二、解决思路 1)、确认vmx配置文件的mac地址 2、确定第一步里的MAC地址和下面Mac地址相同时, vim /etc/udev/rules....
安装NMAP后: dnet:无法打开device eth0? 安装NMAP后,如果出现"dnet:无法打开device eth0"的错误提示,这通常是由于权限问题导致的。在Linux系统中,NMAP需要以root用户或具有特定权限的用户运行才能访问网络设备。 解决这个问题的方法是以root用户身份运行NMAP命令,或者使用sudo命令来提升权限。以下是解决方法: 以root...
DEVICE=eth1 # If you're having problems with gated making 127.0.0.0/8 a martian, # you can change this to something else (255.255.255.255, for example) ONBOOT=yes NAME=eth0 BOOTPROTO=none ONBOOT=yes DNS2=8.8.8.8 TYPE=Ethernet
ping: SO_BINDTODEVICE: Operation not permitted [admin@oceanbase3 root]$ sudo ping xx.xx.xx.25 -I eth0 PING xx.xx.xx.25 (xx.xx.xx.25) from xx.xx.xx.27 eth0: 56(84) bytes of data. 64 bytes from xx.xx.xx.25: icmp_seq=1 ttl=64 time=0.828 ms ...
VFS: Mounted root (nfs filesystem) on device 0:14. devtmpfs: mounted Freeing init memory: 196K INIT: version 2.86 booting Please wait: booting... Error opening /dev/fb0: No such file or directory Starting udev udevd (79): /proc/79/oom_adj is deprecated, please use /proc/79/...
OS polls the link status of all LANs, ingenphy_update_link( )atdrivers/net/phy/phy_device.c. Getting the Phy Link Statusvia davinci_mdiobb_read( )atdrivers/net/ethernet/ti/davinci_mdio.c I am sure the driver using the correct Phy ID to write the eth1 MDIO ...