lwip_device_init() */ if(!lwip_devices_init(etheR_pRio))//etheR_pRio是网卡的优先级,在ucos-ii里面初始化优先级为4 die_with_error("[tcpip_init_done]Fatal:cantaddethernetinterface!"); /*lwipdhcp流程: 1:netif_add:dhcpif设为全0 netif_set_default netif_set_up 2:dhcp_start 3:dhcpif->...
首先是ETH_HandleTypeDef结构体填充,关于结构体各个成员意义已在“ETH初始化结构体详解”作了分析。然后调用系统函数HAL_ETH_Init初始化以太网外设。初始化相关描述符的列表,设置MAC地址和PHY芯片 LAN8720A。Netif_Config函数一般在main函数中在LwIP_Init函数初始化完成后调用。注意,宏定义位于main.h文件中。
eth_device_linkchange(&stm32_eth_device.parent, RT_FALSE); STM32_ETH_PRINTF("link break\n"); } //网线重新连上了 if((u8link_state == 1)&&(u8link_state_now == 0)) { u8link_state_now = 1; //重新配置MAC和DMA rt_stm32_eth_init(RT_NULL); #if !LWIP_DHCP pnetif->ip_addr ...
#include #ifdef RT_USING_FINSH #include <finsh.h> #endif #include "fsl_enet.h" #include "fsl_gpio.h" #include "fsl_phy.h" #include "fsl_cache.h" #include "fsl_iomuxc.h" #ifdef RT_USING_LWIP #include <netif/ethernetif.h> #include "lwip...
components app_trace app_update bootloader bootloader_support bt cmock console cxx driver efuse esp-tls esp_adc esp_app_format esp_coex esp_common esp_eth include esp_eth.h esp_eth_com.h esp_eth_driver.h esp_eth_mac.h esp_eth_netif_glue.h ...
通过eth1 这样的名字,找 struct net_device 分三个步骤: 1. 创建 struct net_device 类型的变量 XA ; 2. 将创建的变量 XA 通过 register_netdevice 函数进行注册; 3. ifconfig ethx up,有了这最后一步,才能在 ifconfig 命令的输出中看到增加的 ethx; ...
esp_eth_netif_glue.h esp_eth_phy.h esp_eth_phy_802_3.h esp_eth_spec.h eth_phy_802_3_regs.h src test_apps .build-test-rules.yml CMakeLists.txt Kconfig esp_event esp_gdbstub esp_hid esp_http_client esp_http_server esp_https_ota esp_https_server esp_hw_support esp_lcd esp_lo...
通过eth1 这样的名字,找 struct net_device 分三个步骤: 1. 创建 struct net_device 类型的变量 XA ; 2. 将创建的变量 XA 通过 register_netdevice 函数进行注册; 3. ifconfig ethx up,有了这最后一步,才能在 ifconfig 命令的输出中看到增加的 ethx; ...
7.1 netif_receive_skb. 26 7.2 Br_handle_frame. 28 7.3 Br_handle_frame_finish. 29 7.4 Br_pass_frame_up. 29 7.5 Br_forward. 30 7.6 __br_forward. 31 7.7 Br_forward_finish. 31 7.8 Br_dev_queue_push_xmit 31 8... 参考文献... 32 ---...
#include <netif/ethernetif.h> #include "stm32_eth.h" #endif 线程LED1中添加网络初始化代码: #ifdef RT_USING_LWIP { extern void lwip_sys_init(void); eth_system_device_init(); rt_hw_stm32_eth_init(); rt_device_init_all(); lwip_sys_init(); rt_kprintf("TCP/IP initialized!\n");...