这是/etc/init.d/ifconfig-eth0的内容, 加入了我的一些注释 #!/bin/sh echo -n Try to bring eth0 interface up...>/dev/ttySAC0 #判断/etc/eth0-setting文件是否存在 if [ -f /etc/eth0-setting ] ; then #读取配置文件信息 source /etc/eth0-setting #如果根文件系统为nfs,则说明网卡已经配置...
2)运行网卡设置脚本/etc/init.d/ifconfig-eth0 这是/etc/init.d/ifconfig-eth0的内容, 加入了我的一些注释 #!/bin/sh echo -n Try to bring eth0 interface up...>/dev/ttySAC0 #判断/etc/eth0-setting文件是否存在 if [ -f /etc/eth0-setting ] ; then #读取配置文件信息 source /etc/eth0...
2)运行网卡设置脚本/etc/init.d/ifconfig-eth0 这是/etc/init.d/ifconfig-eth0的内容, 加入了我的一些注释 #!/bin/sh echo -n Try to bring eth0 interface up...>/dev/ttySAC0 #判断/etc/eth0-setting文件是否存在 if [ -f /etc/eth0-setting ] ; then #读取配置文件信息 source /etc/eth0...
2)运行网卡设置脚本/etc/init.d/ifconfig-eth0 这是/etc/init.d/ifconfig-eth0的内容, 加入了我的一些注释 复制代码 1. #!/bin/sh 2. 3. echo -n Try to bring eth0 interface up...>/dev/ttySAC0 4. 5. #判断/etc/eth0-setting文件是否存在 6. if [ -f /etc/eth0-setting ] ; then ...
6. if [ -f /etc/eth0-setting ] ; then7.#读取配置文件信息8.source /etc/eth0-setting9.10.#如果根文件系统为 nfs,则说明网卡已经配置OK,这里什么都不需要配置了11. if grep -q "^/dev/root / nfs " /etc/mtab ; then12.echo -n NFS root ... > /dev/ttySAC013....
Ubuntu|开机ifconfig没有eth0只有lo和无线,之前修改过/etc/network/interfaces 中的信息 林水溶 3369 发布于 2017-01-01 过程是这样的: 因为校园网客户端的原因,需要修改电脑的MAC地址。 根据教程改了/etc/network/interfaces 中的信息: 原本是: # interfaces(5) file used by ifup(8) and ifdown(8) auto...
device ( RO): eth0 MAC ( RO): fe:ff:ff:ff:ff:ff physical ( RO): false managed ( RO): true currently-attached ( RO): true MTU ( RO): 1500 VLAN ( RO): 131 vlan-master-of ( RO): 67926b17-e6da-da3a-03d1-d93179b943ea ...
The config-file setting of /etc/network/interfaces for a nfs service on iMX6q,the platform sabre-auto can't start a eth0 when power in and the commond $ifconfig typing it will return nothing. root@imx6qsabreauto:~# ifconfig root@imx6qsabreauto:~# setting of /etc/network...
ETH='eth0' # PPPoE user name. You may have to supply "@provider.com" Sympatico # users in Canada do need to include "@sympatico.ca" # Sympatico uses PAP authentication. Make sure /etc/ppp/pap-secrets # contains the right username/password combination. ...
"subnetMasks": "lo=/8,/128;wlan0=/24", "defaultGateways": "wlan0=192.168.1.1", "dnsServers": "wlan0=1.1.1.3,1.0.0.3", "dhcpEnabled": "eth0=false;lo=false;wlan0=true", "enabled": "eth0=false;lo=unknown;wlan0=true", "connected": "eth0=false;lo=true;wlan0=true" } } }...