esphome: name: esp01s-1 platform: ESP8266 board: esp01_1m wifi: networks: ssid: "blue_sky" #改成你的wifi名称 password: "720805zzy" #改成你的wifi密码 power_save_mode: light #manual_ip: #static_ip: 192.168.50.189 #gateway: 192.168.50.1 #subnet: 255.255.255.0 # Enable fallback hotspot...
默认5min#power_save_mode: none # 节能模式，启用的话不会一直连接wifi#fast_connect: $wifi_fast_...
power_save_mode: none # 节能模式,启用的话不会一直连接wifi fast_connect: $wifi_fast_connect # 快速连接,不执行完整的wifi扫描,当存在多个相同wifi可能会直接连接到最弱的信号 ota组件 ota: safe_mode: true # 连续10次启动失败,进入安全模式,只加载Serial Logging+WiFi+OTA组件 password: $ota_password we...
据说隔壁老王家这个温湿度传感器是带SLEEP模式的,但是因为我把电池用掉了,所以把SLEEP的代码去掉了。动手能力强会玩ESPHome的兄弟的可以在WIFI下加入以下语句:power_save_mode: high。另外因为怕在线otg提示内存不足所以board类型我选择了esp01_1m(8M FLASH)。 Power Save Mode 使用感受 价格便宜,把电池拆掉绑定到插...
power_save_mode: none # 节能模式,启用的话不会一直连接wifi fast_connect: $wifi_fast_connect # 快速连接,不执行完整的wifi扫描,当存在多个相同wifi可能会直接连接到最弱的信号 ota组件 ota: safe_mode: true # 连续10次启动失败,进入安全模式,只加载Serial Logging+WiFi+OTA组件 ...
timeout:$wifi_reboot_timeout# 无wifi连接自动重启时间，默认5minpower_save_mode:none# 节能模式，...
power_save_mode(可选,字符串):WiFi接⼜的省电模式。查看省电模式output_power(可选,字符串):WiFi接⼜的TX功率从8.5dB到20.5dB。ESP8266的默认值为20dB,20.5dB可能会导致意外重新启动。fast_connect(Optional,boolean):Ifenabled,directlyconnectstoWiFinetworkwithoutdoingafullscanfirst.Thisisrequiredforhidden...
-ssid:!secret wifi_ssidpassword:!secret wifi_password-ssid:!secret wifi_ssid_269password:!secret wifi_password_269power_save_mode:nonelogger:baud_rate:0#(UART logging interferes with cse7766)level:DEBUGapi:ota: -platform:esphome#Device Specific Configuart:rx_pin:RXbaud_rate:4800binary_sensor: ...
output_power: 20db power_save_mode: none At 90% wifi Signal the pi pico w device constantly disconnects from the API and loos the wifi connection thus rendering the pi pico w to reboot permanently and in turn switch off all Outputs in the process and have to restart everything, very few...
power_down_pin: GPIO32 name: Camera01 #连接HomeAssistant后显示的名称,可以更改 完成后整体是这样的: 先点击右上角的SAVE保存一下,然后点击INSTALL,开始编译流程:首先弹出安装方式选择界面,选择最后一个“Manual download”: 到选择版本界面,选择Legacy format: ...