(as# string) and the value of the measurement (either integer or float number).## This allows for sensor that can return multiple readings (e.g. temperature/# humidity sensors or powermeters).# For example:# {% set notification = payload|fromjson %}# {set_result("temperature", ...
max_value: 600 step: 1 mode: box update_interval: never optimistic: true restore_value: true initial_value: 100 icon: "mdi:arrow-collapse-right" entity_category: CONFIG #Occupancy sensor binary_sensor: - platform: ld2410 has_target: name: Radar Target id: radar_has_target has_moving_targe...
ENPython 编程语言是一种高级的通用编程语言，广泛用于各种目的。该软件由网页设计、数据分析和人工智能组...
# Example configuration entry esphome: name: livingroom esp8266: board: nodemcuv2 binary_sensor: - platform: gpio name: Pin GPIO17 pin: GPIO17 特殊引脚 GPIO0 控制引导模式 GPIO1 UART TX别针 GPIO2 控制引导模式 GPIO3 UART RX引脚 GPIO6 SDIO/Flash CLK引脚 GPIO7 SDIO/闪存数据0针 GPIO8 SDIO...
Settingdiscoverydiscovery_object_id_generator:ESPHomeMQTT集成配置中的device_name将导致家庭助理在⽣成的实体名称中包含设备名称(例如,sensor.uptime变成sensor.<devicename>_uptime),从⽽更容易区分各种实体列表中的实体。默认值默认情况下,如果您⼿动指定了所有消息,ESPHome将以节点名称或topic_prefix为前缀。客户...
Therunning_sensorvalue is also shown (Bot2 is running). Define Bot service callable from HomeAssistant api:services: -service:run_bot2_scriptvariables:script_no:intthen:lambda:|-id(bot_2).run(script_no); Above service can be called from Home Assistant as below: ...
- lambda: |- ESP_LOGD("virtual_ble_light", "Connected to BLE device"); - binary_sensor.template.publish: id: led_ble_connected_sensor state: ON - switch.turn_off: led_ble_on_off_switch on_disconnect: then: - lambda: |- ESP_LOGD("virtual_ble_light", "Disconnected to BLE device...
agc_value: 0 # white balance setting wb_mode: auto binary_sensor: - platform: status name: esp-eye status sensor: - platform: wifi_signal name: esp-eye WiFi Signal Make sure to update with your own encryption keys (or use the ones that were automatically generated). I’ve replaced mine...
sensor: - platform: adc pin: 33 name: "Valeria" update_interval: 500ms attenuation: 11db filters: - lambda: |- if (x > 3.74) { return 0; } else if (x < 1.53) { return 100; } else { return (3.74-x) / (3.74-2.85) * 100.0; ...
- platform: wifi_signal name: ${device_name}_wifi_signal update_interval: 60s # https://esphome.io/components/sensor/uptime.html - platform: uptime name: ${device_name}_uptime unit_of_measurement: minutes filters: - lambda: return x / 60.0;...