Publish anarmhftoolchain and modify the esphome YAML config to point to that toolchain. I tried this route, but failed because there's no binary release available (anymore) for the8.4.0+2021r2-patch2release of the toolchain that is currently in use by the platform. This would also be a w...
this->mark_failed(); return; } if (!this->read_gpio_outputs_()) { this->mark_failed(); return; } } void TCA9555Component::dump_config() { ESP_LOGCONFIG(TAG, "TCA9555:"); LOG_I2C_DEVICE(this) if (this->is_failed()) { ESP_LOGE(TAG, "Communication with TCA9555 failed!");...
clientInfo- string, name of client to be sent to esphome device. Usually needed only for tracking connection on esphome device. pingInterval- optional. Default -15000. Ping interval. Amount of miliseconds. pingAttempts- optional. Default -3. Number of failed ping attempts after witch connection ...
| | | *** [/data/rfid-reader/.pioenvs/rfid-reader/src/main.cpp.o] Error 1 === [FAILED] Took 2.60 seconds ===ekt May 29, 2023, 8:14pm 10 Did you put the file wiegand_device.h in the esphome folder. I might have forgot to mention you need it. Just Google the file and...
here's the micropython code I used to check the functionality of the setup from machine import Pin from time import sleep import dht sensor = dht.DHT22(Pin(5)) while True: try: sleep(1) sensor.measure() # Retrieves measurements from the sensor ...
0 device_class: temperature - platform: template # Response of "S?\r": Unknown (appears to be stuck at 15.75 C) name: "${name}: Outside Temperature (S6)" id: temperature_outside unit_of_measurement: °C accuracy_decimals: 0 device_class: temperature - platform: template # Response ...
ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems. - esphome/script/ci-custom.py at dev · seuros/esphome
The problem Hello, Voice Assistant is installed on the ESP32-S3-BOX-3. After activating i2c. The Voice Assistant pipeline no longer activates after a few hours. A factory reset does not help. Only deactivating the i2c components and refl...
const import CONF_BITS_PER_SAMPLE, CONF_ID, CONF_SAMPLE_RATE CODEOWNERS = ["@kroimon", "@kahrendt"] DEPENDENCIES = ["i2c"] es8311_ns = cg.esphome_ns.namespace("es8311") ES8311 = es8311_ns.class_("ES8311", AudioDac, cg.Component, i2c.I2CDevice) CONF_MIC_GAIN = "mic_gain"...
import esphome.codegen as cg import esphome.config_validation as cv from esphome.components import sensor from esphome.const import ( CONF_ADDRESS, CONF_DALLAS_ID, CONF_INDEX, CONF_RESOLUTION, DEVICE_CLASS_TEMPERATURE, STATE_CLASS_MEASUREMENT, UNIT_CELSIUS, ) from . import DallasComponent, dallas_...