If its related to startup and ESPHome not booting fast enough, it could be luck of the draw when it works or not, maybe.
# IP address of device. Not really needed for HA (as HA already knows it), but for showing ...
In the test test_bluetooth_device_connect_and_disconnect_times_out, you might enhance the test by asserting the state changes in the states list after the timeout occurs. This would verify that the on_bluetooth_connection_state callback is not inadvertently invoked during timeout situations. 📜...
Today I’m going to show you my latest sensor build which has completely eliminated the soldering. It’s plug and play using ESPHome and Home Assistant. I did this using the Adafruit QT Py module which has a built-in connector for connecting to a I2C (Stemma QT) device like the Grove ...
After this your device should be configured within Home Assistant. If you go to your main dashboard you should see your new light with an option to turn it on and off: Home Assistant – Kauf Light On/Off Control It’s not a bad idea at this point to give your bulb a static lease ...
\r": Not sure what this would be (appears to be stuck to -32 C) name: "${name}: Flue gas Temperature (S5)" id: temperature_flue_gas unit_of_measurement: °C accuracy_decimals: 0 device_class: temperature - platform: template # Response of "S?\r": Temperature setpoint (requested...
i2c_device_schema(0x21)) ) async def to_code(config): var = cg.new_Pvariable(config[CONF_ID]) await cg.register_component(var, config) await i2c.register_i2c_device(var, config) def validate_mode(value): if not (value[CONF_INPUT] or value[CONF_OUTPUT]): raise cv.Invalid("Mode ...
Click “New Device” in the bottom right hand menu. Follow the menus to add the device into your ESPHome instance. Choose “ESP32” as the device type. Now install the configuration to the device. Adding Device to Home Assistant Now head back to your “Settings” menu for Home Assistant ...
If not, is there a way to include Arduino libraries? The display is working with a sketch, but I would like to use the display in HA. Would be happy if it works. nielsnl68commentedAug 26, 2023 please provide some log messages showing when and how it is crashing. ...
I also tried removing everything that's not essential to the upload from my esphome config and this is what I'm left with: substitutions: # Name the device and it's entities device_name: master_bedroom_nspanel # Example config.yaml ...