可以通过arduinoIDE 添加新的开发板(比如Esp8266系列/nodemcu),并且安装对应的开发板的管理工具: 例子:添加esp8266系列开发板(nodeMcu) 打开ArduinoIDE->file->Preference 添加开发板源(addtional Boards Manager URLs) http://arduino.esp8266.com/stable/package_esp8266com_index.json 注意这里再去 board manager...
buildPreferences - Set Arduino preferences which then are used during any build (verify, upload, …). This allows for extra defines, compiler options or includes. The preference key-value pairs must be set as follows: "buildPreferences": [ ["build.extra_flags","-DMY_DEFINE=6...
We'll be using the Arduino IDE as a programming tool but we don't need an Arduino itself. The ESP8266 has all the functionality we need. Note: that after uploading your own code, your ESP8266 won't respond to AT commands any more. Your code has replaced the firmware. Using your code...
1. Start Arduino IDE and open the Preferences window. 2. Enter https://arduino.esp8266.com/stable/package_esp826... into the File>Preferences>Additional Boards Manager URLs field of the Arduino IDE. You can add multiple URLs, separating them with commas. 3.Close this window with the OK ...
line 51: StaticJsonBuffer<200> jsonBuffer; - According to the ArduinoJson documentation (https://bblanchon.github.io/ArduinoJson/) this line is utilizing memory allocated on the stack. An alternative would be to use the heap. At this point my preference is heap, although I've left the co...