(三)AT+CWDHCP=0,1;设置模块打开AP模式下DHCP功能 (四)重启模块 AT+RST (五)AT+CWSAP_CUR=”无线名称”, ”密码”,”热点信道”,”加密方式”。加密方式对应关系如下0:OPEN 1: WEP 2: WPA_PSK 3: WPA2_PSK,4: WPA_WPA2_PSK. (六)AT+CIPAP=”IP”设置ESP8266IP地址,本设置不会保存FLASH,AT+CI...
AT+CWDHCP=x,y 开启dhcp,y=0关闭,1开启,x为0时是ap,1是station, 2是二者同时 AT+CWJAP="xxx","yyy" 当作为station模式时,加入热点xxx,xxx是热点SSID,yyy是热点密码 AT+CIPMUX=x 开启mux多路连接,如果要设置为服务器时,必须开启 AT+CIPSERVER=x,y 开始服务器,x为1时开启,0关闭,y为开启的端口,http...
13.AT+CWDHCP–Enable/DisableDHCP 26 14.AT+CWDHCP_CUR–Enable/DisableDHCP 27 15.AT+CWDHCP_DEF–Enable/DisableDHCPandsavetoFlash 28 16.AT+CWAUTOCONN–AutoconnecttoAot 28 17.AT+CIPSTAMAC–Setmacaddressofstation 29 18.AT+CIPSTAMAC_CUR–Setmacaddressofstation 29 19.AT+CIPSTAMAC_DEF–Setmac...
AT+CWMODE=x 设置模式为x,1:station模式 2:ap模式 3:同时 AT+RST 复位 AT+CWDHCP=x,y 开启dhcp,y=0关闭,1开启,x为0时是ap,1是station, 2是二者同时 AT+CWJAP="xxx","yyy" 当作为station模式时,加入热点xxx,xxx是热点SSID,yyy是热点密码 AT+CIPMUX=x 开启mux多路连接,如果要设置为服务器时,必须开...
AT+CWDHCP=x,y 开启dhcp，y=0关闭，1开启，x为0时是ap，1是station, 2是二者同时 AT+CWJAP...
百度试题 结果1 题目ESP8266 Wi-Fi模块设置AP热点的SSID名称和密码的指令为( )。——[单选题] A. AT+CWMODE B. AT+CWDHCP C. AT+CWQAP D. AT+CWSAP 相关知识点: 试题来源: 解析 D 反馈 收藏
此方法用于设置ESP在STA模式下固定的STA信息,不设置默认由DHCP分配; 3.1.6 setMinimumSignalQuality —— 设置最小的信号质量 函数说明: /** * 功能描述:设置能够接受的最低信号强度 * @param quality 信号强度,默认为8 */voidWiFiManager::setMinimumSignalQuality(intquality){ _minimumQuality = quality;} ...
AT+CWDHCP_CUR – 设置 DHCP ,不保存到 flash 30 15. AT+CWDHCP_DEF – 设置 DHCP 并保存到 Flash 31 16. AT+CWAUTOCONN – 上电是否⾃动连接 AP 32 17. AT+CIPSTAMAC – 设置 ESP8266 station 接⼝的 MAC 地址 32 18. AT+CIPSTAMAC_CUR – 设置 ESP8266 station 当前 MAC 地址 33 19...
AT+CWDHCP_DEF Enable/disable DHCP saved to flash - SoftAP DHCP server enabling is not immplemented. AT+CWAUTOCONN Connect to an AP automatically when powered on. AT+CIPSTAMAC_CUR Sets or prints the MAC Address of the ESP8266 Station. Only query is implemented. AT+CIPSTAMAC_DEF Sets ...
guration of the ESP32 SoftAP3.7 AT+CWLIF—IP of Stations to Which the ESP32 SoftAP is Connected3.8 AT+CWQIF—Disconnect Station from the ESP SoftAP3.9 AT+CWDHCP—Enables/Disables DHCP3.10 AT+CWDHCPS—Sets the IP Address Allocated by ESP32 SoftAP DHCP (The conf i guration is saved in ...