[https://www.espressif.com.cn/zh-hans/support/download/other-tools] 下载完毕之后,选择对应模块的型号。 接线方式如下所示。 选择刚刚下载的固件,配置好对应的串口,点击下载即可。 下载成功如下所示。 若出现这种情况8-download data fail,则是flash大小不够,需要更换nor flash
https://www.espressif.com.cn/zh-hans/support/download/other-tools 下载完毕之后,选择对应模块的型号。 接线方式如下所示。 选择刚刚下载的固件,配置好对应的串口,点击下载即可。 下载成功如下所示。 若出现这种情况8-download data fail,则是flash大小不够,需要更换nor flash。 创建阿里云产品 阿里云官网:https:...
若出现这种情况8-download data fail,则是flash大小不够,需要更换nor flash。 创建阿里云产品 阿里云官网:aliyun.com/ 选择物联网平台,开始创建产品。 选择公共实例,点击进入。 创建产品。 这里我的基本配置如下所示。 添加设备。 这里可以输入自己喜欢的设备名字,也可以点击确认自动生成。 生成设备之后,...
BREAKING: analogWriteRange 8-bit default (#7456) BREAKING: HTTPClient: RequestHandler: Pass String by const reference (#6583) Boot eboot: .RODATA, upstream uzlib, move CRC, save 112 bytes (#7844) Update eboot to build with C17, not C99 standard (#7837, #7838) Fix eboot crash with exce...
打开flash_download_tools_v3.6.5.exe,选择ESP8266 DownloadTool 注意一下红框内容 第一个选择刚才的DNS.ino.ino.nodemcu.bin文件 第二个地址输入 0x00000(这里可能会出现红框,导致编译上传失败) [解决方案:重启一下DownloadTool,手动输入地址] 其他对照着面板修改一下就行了 ...
8. When the ESP8266 device receives data from the server, the following message is displayed: +IPD,0,n:xxxxxxxxxx //received n bytes, data=xxxxxxxxxxx 9. Disconnect TCP: AT+CIPCLOSE Response : CLOSED OK UDP UDP transmission does not distinguish between server and client and is established...
+ FUNCTION_ID3)) && (wifi_receive_mode_data.device_id == (DeviceParamSave.device_id) || (wifi_receive_mode_data.device_id == 0XFFFF))) { crc_temp = check_crc16((uint8_t *)&wifi_receive_mode_data, wifi_receive_mode_data.device_len - 2); if(wifi_receive_mode_data.crc == ...
本案例为机智云开发平台初级基础应用开发实例,开发者通过使用机智云Aiot开发平台和ESP8266,实现对USB风扇的远程APP控制,本案例原理简单、制作成本低,适合所有具备嵌入式基础的开发者,尤其适合准备进入IoT的从业者、高校相关专业学生参考学习,掌握物联网设备基础开发逻辑。
8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. ②:先通过socket连接服务器的端口,一般地,默认是80!其中http请求的格式内容如下:注意这个Host的内容可以是域名或者IP,这个要根据服务器来配置。 GET /api/download/user2.4096.new.6.bin HTTP/1.0 ...
printf("ota_start_download:upgrade file download pusrdata:%s\n\n", pusrdata); //返回"Accept-Length: "在pusrdata中首次出现的地址 if(isAccept) ptr=(char*)strstr(pusrdata,"Accept-Length: "); else ptr=(char*)strstr(pusrdata,"Content-Length: "); ...