当编译时出现xtensa-esp32-elf-g++: error: CreateProcess: No such file or directory错误时,参考一下解决方案: 参考https://forum.arduino.cc/t/avr-g-error-device-specs-specs-atmega328p-no-such-file-or-directory/569829 15楼回答 如果软件版本太低也可能,我之前是1.8.4版本,经常报这个错误,感觉是不...
针对你的问题“xtensa-esp32-elf-gcc is not a full path and was not found in the path”,我将按照提供的提示分点回答,并尽量包含相关的代码片段或操作指南。 检查xtensa-esp32-elf-gcc是否已安装: 首先,你需要确认xtensa-esp32-elf-gcc是否已经安装在你的系统上。这通常可以通过在命令行中运行以下命令来...
使用wget命令下载 64 位的工具链: wget https://dl.espressif.com/dl/xtensa-esp32-elf-gcc8_2_0-esp32-2019r1-linux-amd64.tar.gz 1. 下载过程 将工具链解压: tar -xzf xtensa-esp32-elf-gcc8_2_0-esp32-2019r1-linux-amd64.tar.gz 1. 解压后的工具链位于路径~/esp/xtensa-esp32-elf下面。...
tools/xtensa-esp32s2-elf/esp-2021r2-patch3-8.4.0/xtensa-esp32s2-elf/bin/xtensa-esp32s2-elf-gcc
export PATH=~/esp/tools/xtensa-esp32-elf/bin 1. 7、使新的环境变量立即生效 source /etc/profile 1. 8、查看gcc版本信息 xtensa-esp32-elf-gcc -v 1. 如果有gcc版本信息,即为添加成功,否则为失败。 9、在用户配置文件中添加 IDF_PATH 和 idf.py PATH (CMake) ...
export PATH=$PATH:$HOME/esp32/tools/xtensa-esp32-elf/bin 使环境变量生效: $ source ~/.bashrc 查看编译工具版本(如输入命令时,使用tab键无法自动补全或联想,可尝试退出当前shell终端,重新打开): $ xtensa-esp32-elf-gcc -v 安装esptool,此工具用于生成 esp32 二进制烧录文件: ...
这个问题表明 `xtensa-esp32-elf-gcc` 编译器无法执行二进制文件。这可能是由以下原因导致的: 1. **路径问题**:确保 `xtensa-esp32-elf-gcc` 编译器已经安装在你的系统上,并且它的路径已经添加到环境变量中。你可以通过在终端中运行 `echo $PATH` 来检查环境变量。 2. **权限问题**:可能是二进制文件没...
The context of the question is here - https://github.com/esp-rs/esp-idf-sys/i ... 1872154944 So it seems there is one single gcc now for all cpu architectures, but that gcc has by default XCHAL_HAVE_BE set to 1 - so im assuming there is some option somewhere that specifies that...
setup.html not work for you? I have just tried the installation procedure above and I get the same error. You may have provided arm64 binaries but the installation procedure fails with this message "ERROR: tool xtensa-esp32-elf does not have versions compatible with platform linux-arm64"...
xtensa-esp32-elf-gcc ${FLAGS} -E -P -v -dD "${INPUTS}" 1. 然后单击CDT GCC Build Output Parser,替换Compiler command pattern输入框为为xtensa-esp32-elf-(g?cc)|([gc]\+\+)|(clang) xtensa-esp32-elf-(g?cc)|([gc]\+\+)|(clang) ...