使用EEPROM.write(addr,data)来写数据,参数分别为地址&数据,写数据后需要通过EEPROM.commit()或EEPROM.end()将数据保存到EEPROM; 使用EEPROM.read(addr)来读数据; 对EEPROM的操作以4字节为单位,比如上面中第一次size写10时,程序自动将size转成了12处理,第二次size写5时,程序自动将size转成了8处理; 每次EEPROM....
在 MyCallbacks 类中,定义了一个名为 onWrite 的回调函数,该函数将在BLE特征被写入(write)时被调用。具体来说,当远程设备向BLE特征写入数据时,这个回调函数会被触发。以下是 onWrite 回调函数的主要功能: voidonWrite(BLECharacteristic*pCharacteristic): 这是一个回调函数的声明,接受一个指向 BLECharacteristic 对象...
I'm develop custom board with ESP32-D0WD. It uses sd card for loging information. Every time I'm trying to write to sd card i'm getting errors.Connection between MCU and sd card are same as on lyrat4.3: SD_CLK -> MTMS (Pin 17)...
Project build complete.To flash,runthiscommand:C:\Users\admin\.espressif\python_env\idf4.3_py3.8_env\Scripts\python.exe..\..\..\Users\admin\Desktop\esp-idf\components\esptool_py\esptool\esptool.py-p(PORT)-b460800--before default_reset--after hard_reset--chip esp32s2 write_flash--flash...
//--- Write to file File fileToWrite = FFat.open("/test.txt", FILE_WRITE); if(!fileToWrite){ Serial.println("There was an error opening the file for writing"); return; } if(fileToWrite.println("ORIGINAL CONTENT")){ Serial.println...
通过EEPROM.write()写入数据后,之后需要调用EEPROM.commit()使更改生效,写入完成。 登录后复制EEPROM.commit(); EEPROM还有其它函数,都在库文件中,大家可以在下面两个文件中找到相关源码。 EEPROM.h EEPROM.c 完整程序 这里我们用一个例子来演示一下,我们在整片EEPROM上写入数据,从0-255,反复循环写入,然后再读取...
D、此时,可以向功放芯片发送数据了。发送数据调用 i2s_channel_write 函数,接收数据调用 i2s_channel_read 函数。 E、不再使用 I2S 时可以调用 i2s_del_channel 函数删除通道,释放驱动。 三、初始化 HTTP 客户端 A、用 esp_http_client_config_t 结构体初始化 HTTP 客户端,如请求的 URL,请求方式(GET、POST ...
格式:esptool.py--port 串口号 write_flash 地址1文件名1.bin 地址2文件名2.bin 示例:esptool.py--portCOM4write_flash0x00000my_app.elf-0x00000.bin0x40000my_app.elf-0x40000.bin esptool.py 在D:\AliOS-Things-master\platform\mcu\esp32\esptool_py\esptool目录下,可通过「计算机 - 属性 - 高级...
ESP32 是集成 2.4 GHz Wi-Fi 和蓝牙双模的单芯片方案,这里使用的模组是Xtensa® 32-bit LX6 双核处理器,运算能力高达 600 DMIPS,具有丰富的外设接口,主要用于IoT。 1、硬件资料 这里使用ESP32-WROOM-32模组,模组引脚布局如下:手册 模组引脚说明:
esp.flash_user_start() esp.flash_erase(sector_no) esp.flash_write(byte_offset, buffer) esp.flash_read(byte_offset, buffer) 实例:4M - FLASH >>> esp.flash_size()/1024/1024 4.0 参考链接: [1]ESP32 4 MB 闪存?