ESP_LOGI(MAIN_TAG,"Started on CPU%d", (int)xPortGetCoreID());#if!CONFIG_FREERTOS_UNICORE//Wait for FreeRTOS initialization to finish on other core, before replacing its startup stackesp_register_freertos_idle_hook_for_cpu(other_cpu_startup_idle_hook_cb, !xPortGetCoreID());while(!s_...
配置ESP-IDF FreeRTOS:可以使用 make meunconfig 配置 ESP-IDF FreeRTOS 的几个方面,例如在 Unicore 模式下运行 ESP-IDF,或配置每个任务将具有的线程本地存储指针的数量. 反向移植特性 以下功能已从 FreeRTOS v9.0.0 反向移植到 ESP-IDF. 静态分配 此特性已从 FreeRTOS v9.0.0 反向移植到 ESP-IDF. 必须在...
创建任务后loop循环还能不能使用 */#include<Arduino.h>#include<freertos/FreeRTOS.h>#include<freertos/task.h>#ifCONFIG_FREERTOS_UNICORE#defineARDUINO_RUNNING_CORE 0#else#defineARDUINO_RUNNING_CORE 1#endif//创建任务函数voidTask1(void*pvParameters);voidTask2(void*pvParameters);voidsetup(){// put ...
CONFIG_FREERTOS_UNICORE = y 重新运行应用程序之后更新的堆利用率统计信息如下所示: 任务的内存使用率统计: || 任务名 | 峰值 DRAM |峰值 IRAM|| || aws_iot_task | 63124 | 0 || || tiT | 3892 | 0 || || wifi | 31192 | 0 || 系统的内存使用率统计: || 最小可用DRAM | 最小可用IRAM...
ESP32 S3 基于开发框架(Arduino)实现FreeRTOS多任务并行 - 掘金 (juejin.cn) 1 多并行任务创建 #if CONFIG_FREERTOS_UNICORE #define ARDUINO_RUNNING_CORE 0 #else #define ARDUINO_RUNNING_CORE 1 #endif /* FreeRTOS任务优先级:任务优先级数值越小,任务优先级越低。 一、 FreeRTOS 中任务的最高优先级是...
#if !CONFIG_FREERTOS_UNICORE // Wait for FreeRTOS initialization to finish on APP CPU, before replacing its startup stack while (port_xSchedulerRunning[1] == 0) { ; } #endif //Enable allocation in region where the startup stacks were located. ...
Esp32 S2 arduino FreeRTOS 示例 基于 Esp32 S2 单核的板子 #if CONFIG_FREERTOS_UNICORE#define ARDUINO_RUNNING_CORE 0#else#define ARDUINO_RUNNING_CORE 1#endif#define LED 2// define two tasks for Blink & AnalogReadvoid TaskBlink( void *pvParameters );void TaskEcho( void *pvParameters );// ...
也可以正常刷写程序,但是就一直打印下面这些文字:E (119) cpu_start: Running on single core variant of a chip, but app is built with multi-core support.E (119) cpu_start: Check that CONFIG_FREERTOS_UNICORE is enabled in menuconfigabort() was called at PC 0x400826c5 on core 0Backtrace: ...
I (269) cpu_start: Unicore app I (277) cpu_start: Pro cpu start user code I (277) cpu_start: cpu freq: 160000000 Hz I (278) cpu_start: Application information: I (280) cpu_start: Project name: mqtt_tcp I (286) cpu_start: App version: 4ab17e1-dirty ...
west build -p -b esp32_devkitc_wroom/esp32/procpu Expected behavior I (61) soc_init: ESP Simple boot I (61) soc_init: compile time Mar 3 2025 17:39:24 W (61) soc_init: Unicore bootloader I (62) soc_init: chip revision: v3.1 ...