Re: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED PostbyAnthonyThet»Tue Dec 28, 2021 2:04 pm Hi ESP_Sprite, thanks so much for your prompt reply and suggestion. And yes, you're right, I didn't run in another terminal and now when I run in another terminal, it seems wo...
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling" Info : clock speed 20000 kHz Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica...
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED ** Programming Started ** Error: timed out while waiting for target halted / 4 - 2 Error: xtensa_wait_algorithm: not halted 0, pc 0x40090068, ps 0x60025 Error: Failed to wait algorithm (-302)! Error: Algorithm run failed ...
1. **USB驱动问题**：错误 "Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED" 表示...
Warn : Failed to open device: LIBUSB_ERROR_NOT_SUPPORTED. Error: No J-Link device found. 错误信息提示没有找到 J-Link 设备,这是由于 Windows 下没有 libusb,需要更新 Jlink 驱动。解决办法如下: 从Zadig 官网下载 Zadig 工具(Zadig_X.X.exe)并运行。
2.其次,windows上一定要用msys2的mingw32编译openocd.用mingw64能编出来,但是会报add_service(): error creating socket: No error。 官网告诉你要用mingw32,但是不会告诉你mingw64会有问题。坑爹吧。 3.windows上关于libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED ...
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED [OpenOCD] ❌ Error: esp_usb_jtag: could not find or open device! 三、问题解决 然后去官网浏览解决方案。找到一些openocd相关的教程。 测试发现openocd也正常运行,说明openocd安装本身没有问题。
driver/usb: Updated libusb to 1.0.26 in MacOS and Windows builts. It eliminates LIBUSB_ERROR_NOT_SUPPORTED error reported on Windows which actually did not break anything. See#255. flash/esp: Added extra warning messages for some flasher stub return codes. They are intended to avoid users'...
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED Info : ftdi:ifyou experience problems at higher adapter clocks,trythe command"ftdi_tdo_sample_edge falling"Info : clock speed20000kHz Info : JTAG tap: esp32.cpu0 tap/device found:0x120034e5(mfg:0x272(Tensilica), part:0x2003, ...
Error: type ‘esp32’ is missing virt2phys Warn : Failed to open device: LIBUSB_ERROR_NOT_SUPPORTED. Info : J-Link V11 compiled Aug 14 2019 16:21:09 Info : Hardware version: 11.00 Info : VTarget = 0.000 V Info : clock speed 3000 kHz Error: JTAG scan chain interrogation failed: ...