想ping通ESP32得启用NAPT ip_napt_enable这个接口
dhcps_set_option_info(6, &dhcps_dns_value,sizeof(dhcps_dns_value));// Set custom dns server address for dhcp server 默认跟随路由器 【推荐换成国内DNS】dnsserver.u_addr.ip4.addr = htonl(0xC0A80301); dnsserver.type = IPADDR_TYPE_V4; dhcps_dns_setserver(&dnsserver);#ifIP_NAPT// !
dhcps_dns_setserver(&dnsserver); #if IP_NAPT // !!! 必须启动sta后再设置,不然ap无网络 !!! Set to ip address of softAP netif (Default is 192.168.4.1) u32_t napt_netif_ip = 0xC0A80401; ip_napt_enable(htonl(napt_netif_ip), 1); #endif } 1. 2. 3. 4. 5. 6. 7. 8. 9....
One issue is that after the call to "ip_napt_enable" I have to use a delay, which is not a good practice. Is there an API that could be polled to know when the device is ready? After the delay I call WiFi.status and it returns "6" (Disconnected) and the IP address returned by...
(nvs_flash_erase());ret=nvs_flash_init();}ESP_ERROR_CHECK(ret);// Setup WIFIwifi_init_sta();//这里就是打开nat转换的代码,但是除了代码这里要有,还需要配置#ifIP_NAPTip_napt_enable(ipaddr_addr(MY_AP_IP_ADDR),1);ESP_LOGI(TAG,"--->NAT is enabled");#endif} 补一份cpp代码 #include...
设置eth_enable [0|1]: 启用/禁用SPI总线上的ENC28J60以太网网卡( 默认: 0 - 已经禁用 设置eth_ip ip地址: 为ETH接口设置 static IP地址 设置eth_ip dhcp: 为ETH接口配置动态IP地址,默认值 设置eth_netmask 网络掩码: 为ETH接口设置一个 static 网络掩码 ...
I'm trying to enable NAT by using lwip from esp-idf, but the function to do it seems that isn't working properly. The first image shows the "if" that must work to execute the ip_napt_init function where the necessary structures are initialized, but here this 'if' is never executed,...
-when:build_vars.MGOS_LWIP_ENABLE_IPV4_NAT == "1" apply: build_vars: ESP_IDF_SDKCONFIG_OPTS:> ${build_vars.ESP_IDF_SDKCONFIG_OPTS} CONFIG_LWIP_L2_TO_L3_COPY=y CONFIG_LWIP_IP_FORWARD=y CONFIG_LWIP_IPV4_NAPT=y cdefs: IP_NAPT_MAX:64 ...
(true, true); if (driver == NULL) { ESP_LOGE(TAG, "Failed to create wifi interface handle"); return ESP_FAIL; } esp_netif_attach(netif_ap, driver); set_dhcps_dns(netif_ap, addr); start_mesh_link_ap(); ip_napt_enable(g_mesh_netif_subnet_ip.ip.addr, 1); } return ESP_OK;...
CONFIG_LWIP_IPV4_NAPT=y # CONFIG_LWIP_STATS is not set # CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set CONFIG_LWIP_ESP_GRATUITOUS_ARP=y CONFIG_LWIP_GARP_TMR_INTERVAL=60 CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y # CONFIG_LWIP_DHCP_DISABLE_CLIE...