File file = SPIFFS.open(path, "r"); // 则尝试打开该文件 #else if (FFat.exists(path)) { // 如果访问的文件可以在FFat中找到 File file = FFat.open(path, "r"); // 则尝试打开该文件 #endif esp32_server.streamFile(file, contentType);//
要检查插件是否已成功安装,请打开您的 Arduino IDE。选择您的 ESP32 板,转到工具并检查您是否有“ ESP32 Sketch Data Upload ”选项。 使用文件系统上传器上传文件 要将文件上传到 ESP32 文件系统,请按照以下说明进行操作。 1)创建一个Arduino程序并保存。出于演示目的,您可以保存一个空程序。
server.on("/", handleRoot); //注册链接和回调函数 server.onNotFound(handleNotFound); //未知链接回调函数注册 server.on("/getRandomData", HTTP_GET, handleAjax); //注册网页js中ajax发送的get方法的请求和回调函数 server.begin(); //启动Web服务器 Serial.println("Web服务器启动"); } void loop...
ESP_ERROR_CHECK(i2s_new_channel(&chcfg, &iis_tx_ch, NULL));//2、配置通道i2s_std_config_t stdcfg ={//时钟源,调用默认宏设置就行了.clk_cfg =I2S_STD_CLK_DEFAULT_CONFIG(SAMPLE_RATE),//slot其实就是声道数.slot_cfg =I2S_STD_PCM_SLOT_DEFAULT_CONFIG(I2S_DATA_BIT_WIDTH_16BIT, I2S_SLOT...
General purpose web server (code) Data logging web server (code) Hardware serial ports Over-the-air (OTA) updating (code) Sensor server & clients for DHT, SHT, BMP085, BMP180, DS18B20, etc. (code) Hints and tips (code) File downloads via HTTP with web interface File uploads...
(void *arg, esp_event_base_t event_base, int32_t event_id, void *event_data); extern esp_netif_t *ap_netif; extern httpd_handle_t server; //网页服务 extern SemaphoreHandle_t ap_sem; //信号量 TaskHandle_t wifi_station_task_Handler; // #define EXAMPLE_ESP_WIFI_SSID "nova 5" /...
FAT File System on MMC SDCARD SDMMC只能与ESP32一起使用,ESP32-S2和ESP32-C3不支持。 您可以选择1线模式和SD卡速度。 2) WiFi设置 3) 使用mDNS进行连接 4) 使用静态IP 5) 时间同步NTP服务器和时区设置 6) FTP 服务器设置 7) 长文件名支持 ESP-IDF 框架下的 FATFS默认使用的文件名格式是8.3短文件名...
I use arduino IDE 2.3.2 for firmware but go back to 1.8.9 to use the ESP32 Sketch Data Upload Tool using spiffs. This works fine when using the IDE. But if I take the same spiffs file that is generated using the mkspiffs tool, use the webupdater.ino example, and use the Filesyst...
在终端中输入idf.py menuconfig,进入menuconfig界面,依次选择Partition Table—>选中Custom partition table csv—>选择Custom partition table Csv file—>输入分区表的名称,例如使用partitions.csv,然后选中Generate an MD5 checksum for the partition table,最后保存、退出。
Hi guys I am using esp32 as http client to send multipart data which is basically a jpg file stored in spiffs. I need to send this file to server with the following information. Host: some url Content-Type: multipart/form-data Accept: / ...