Initializes tinyUSB and installs the driver Code Burning Ensure the TF card is installed Select the model (esp32s3) and port Download via UART Burn the program Result demonstration After programming, unplug and plug the ESP32-S3-GEEK again, and you can see a new USB flash driver You ...
首先以boot模式插上usb转串口上电(gnd与IO0短接并rst), sudo chmod 777 /dev/ttyUSB0 esptool.py --chip esp32 --port /dev/ttyUSB0 erase_flash(这一步之前可能需要先get_idf) esptool.py --chip esp32 --port /dev/ttyUSB0 write_flash -z 0x1000 /home/fang/esp-micropython/micropython_camera...
(cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa) PACKAGES: - framework-arduinoespressif32 @ 3.0.0+sha.bf822ef - tool-esptoolpy @ 1.40501.0 (4.5.1) - toolchain-xtensa-...