你好,我用arduino对esp32c3开发板进行编程测试lightsleep的休眠功耗,GPIO2口接红外,发现了一个问题,当我仅使用GPIO唤醒时,休眠后电流为5.16ma,仅使用Timer唤醒时,休眠后电流为1.43ma,奇怪的是当我同时设置GPIO唤醒和Timer唤醒,休眠后电流仍为1.43ma。为何我单独设置GPIO唤醒电流会这么大?
2. 在进入light sleep模式之前,确保UART TX FIFO已经清空。你可以使用`esp_serial_tx_wait_idle()`...
2. 使用定时器唤醒:在Light-sleep模式下,你可以设置定时器唤醒ESP32,然后在唤醒期间进行WIFI连接和...
• Light-sleep 模式:CPU 暂停运行。任何唤醒事件(MAC、主机、RTC 定时器或外部中断)都会唤醒芯片。 Wi-Fi 或 Bluetooth LE 可保持连接。 • Deep-sleep 模式:CPU 和大部分外设都会掉电,只有 RTC 存储器处于工作状态。Wi-Fi 连接数据存储在 RTC 中。 功耗Modem-sleep > Light-sleep > Deep-sleep(详细功...
#include <Arduino.h> #define LED_Pin 2 // 定义LED连接的引脚号为2 #define Touch_Pin 15 // 定义触摸传感器连接的引脚号为15 uint16_t touchValue = 0; // 声明一个无符号16位整数变量touchValue,用于存储触摸传感器的值 void setup() {
I tried to search the forum about this: Is it now possible using esp32 s2, put the the cpu in light sleep while keeping the BLE connection alive? From my understanding that is true for the wi-fi connection so i wonder if the same can be done with BLE. Thanks...
使用Arduino开发ESP32:DeepSleep和RTC Memory的使用 目的 ESP32在工作时功耗蛮大的,所以我们可以在不需要时进行休眠,这也是蛮常用的功能。 基础说明 DeepSleep 使用DeepSleep主要分为两步: 1、配置唤醒源(可以同时配置多个唤醒源); 2、启动DeepSleep; EPS32 DeepSleep的唤醒源有如下几个: ...
Arduino IDE Operating System Win 11 Flash frequency 80 MHz PSRAM enabled no Upload speed 921600 Description Cannot get the device in correct light sleep mode, will get current >250uA instead of the published 35uA In deep sleep all is working as expected (<10uA). How the deep sleep sample...
Hey all, I want to explore the sleep modes on ESP32 using Arduino IDE. By referring the ESP8266 guide, I am able to put the ESP32 in deepSleep mode. I want to use my ESP32 in either lightSleep or modemSleep, both of which are not defined...
DMA 缓冲区需使用__attribute__((aligned(4)))或malloc_caps分配内部 RAM(如MALLOC_CAP_DMA)。 资源限制 ESP32 的 DMA 通道有限,避免同时使用多个外设。 中断冲突 某些库(如 WiFi)可能禁用中断,影响 DMA 传输。 电源管理 低功耗模式(如 Light-sleep)可能关闭 DMA 时钟。 Arduinocore forESP32ESPESP...