7.初始化LVGL static void my_flush_cb(lv_display_t * disp, const lv_area_t * area, uint8_...
Since lvgl 9.1.0 is now natively supported as a component in the ESP32 registry, I have added it using the suggested method: Code: Select all idf.py add-dependency "lvgl/lvgl^9.1.0" And I'm using the following to configure/build the project: Code: Select all idf.py menuconfig idf...
lvgl_esp32_driver:gihub下载地址说明:将两个压缩包解压,将lvgl-release-v8.3重命名为lvgl,lvgl_esp32_drivers_master重命名为lvgl_esp32_drivers,新建ESP-IDF项目,在根目录下创建components文件夹,并将上面两个文件夹放入components文件夹中。 操作:clean一下项目,重新build一下项目,此时界面下方导航栏齿轮按钮(SDK...
EEZ Studio教程基于LVGL9.0_P1-软件下载与安装软件官网:https://www.envox.eu/studio/studio-introduction/ 下载地址(Github):https://github.com/eez-open/studio/releases 百度网盘教程资料链接:https://pan.baidu.com/s/1k8GKBEPQUovFNcm80SE8Fw?pwd=bhku 提取码: bhku...
Re: BSP (Board Support Package) using ESP-IDF 5.x + ESP_LCD + LVGL 9.x Postbydjixon»Wed Apr 24, 2024 12:12 am I still didn't check that link, however, if your Wireless Tag board WT32-SC01 Plus has label (printed on the board at back side) ZX3D50CE02S-V13-USRC then ...
1. ESP-IDF 版本为 v5.2.1 2 拉取 官方 lv_port_esp32 库 git clone --recurse-submodules https://github.com/lvgl/lv_port_esp32.git 3 进入根目录并通过vscode打开 3.1 选择 IDF_TARGET 为 esp32c6 3.2 选择 “via builtin USB-JTAG” ...
刷新esp-idf环境 get_idf 设定目标芯片 idf.py set-target esp32 配置项目 idf.py menuconfig 1) 将闪存设置为4MB 2) 选择显示屏控制芯片 3) SPI总线选择 默认是HSPI。有关ESP32 SPI的说明见《ESP32 ESP-IDF TFT-LCD(ST7735 128x160) LVGL演示》 ...
esp-idf 移植lvgl 驱动ST7789只有背光亮,屏幕没显示(我用的不是HSPI VSPI的硬件gpio,是直接配置为其他GPIO),但是arduino tft_espi屏幕显示就没问题(说明我硬件是没问题的)。像我这样使用GPIO矩阵模拟SPI是不是有什么问题,或者说ESP-IDF需要进行什么配置?
④我们现在idf里面的一个工程案例sample_project,然后创建 ⑤点击YES ⑥依次点击,确保编译无错误并且编译通过 二、向工程移植LVGL库和驱动库lvgl_esp32_drivers ①在工程文件夹下新建一个conponents文件夹。 方法一:直接在工程文件夹下新建文件夹,并命名为components ...
My conclusion is, until proven otherwise, that ESP-IDF v5.2.1, LVGL 9.2.0 and LVGL_ESP32_DRIVERS is not compatible. Somewhere between ESP-IDF v4, LVGL 8 and now, things got broken, and nobody picked up the problem. Whats the alternative? I have a nice ST7789 that i would like to...