2.1 esp_ble_gattc_search_service 2.2 esp_ble_gattc_get_char_by_uuid 2.3 esp_ble_gattc_get_descr_by_char_handle 2.4 esp_ble_gattc_get_attr_count 2.5 esp_ble_gattc_write_char 2.6 esp_ble_gattc_write_char_descr 2.7 esp_ble_gattc_register_for_notify 三、发现服务 本篇是关于GATT客户...
以下GATT 接口位于bt/host/bluedroid/api/include/api/esp_gattc_api.h 2.1 esp_ble_gattc_open 2.2 esp_ble_gattc_search_service 2.3 esp_ble_gattc_get_char_by_uuid 2.4 esp_ble_gattc_get_descr_by_char_handle 2.5 esp_ble_gattc_get_attr_count 2.6 esp_ble_gattc_write_char 2.7 esp_ble_...
The failing part is the following: after callingesp_ble_gattc_write_char_descr()to enable notify or indicate on BLE server device (which is the last step to connect to BLE server device), I am expecting theESP_GATTC_WRITE_DESCR_EVTto be generated, when response from server device is rec...
(26267) HXJ_BLUE_CLIENT: esp_ble_gattc_get_descr_by_char_handle: count:1len:2handle:0025[0m D (26317) BT_LOG: esp_ble_gattc_write_char_descr, the l2cap chaneliscongest.[0m [0;31mE (26367) HXJ_BLUE_CLIENT: esp_ble_gattc_write_char_descr error[0m E (26367) wifi: esp_...
以下GATT 接口位于bt/host/bluedroid/api/include/api/esp_gattc_api.h 2.12 esp_ble_gattc_open 2.13 esp_ble_gattc_close 三、BT控制器和协议栈初始化 使用esp-idf\examples\bluetooth\bluedroid\ble\gatt_client中的例程 ... //esp_bt_controller_config_t是蓝牙控制器配置结构体,这里使用了一个默认的参...
GATT(Generic Attribute profle) GATT服务器通过一个称为属性表的表格组织数据,这些数据就是用于真正发送的数据。 ATT 属性协议 BLE ⾥⾯的数据以属性 (Attribute)⽅式存在,每条属性由四个元素组成: 属性句柄 (Attribute Handle):正如我们可以使⽤内存地址查找内存中的内容⼀样, ATT 属性的句柄也可以协助我们...
status = esp_ble_gattc_read_char( global_gattc_if, current_conn_id, characteristic.char_handle, ESP_GATT_AUTH_REQ_NONE); ESP_ERROR_CHECK(status); As nothing triggers the 'ESP_ERROR_CHECK' I take it that it is not returning an error. Susanche...
使用ble_gatt_server例程手机蓝牙可配对但是无法连接Quote by Cyfarw9dd » Wed Mar 27, 2024 12:53 pm 我所用的设备是合宙的esp32c3,所用的编辑器为vscode,idf的版本应该是4.3-4.4左右。例程中我主要更改了passkey和输入方式,在配对时手动输入pin码进行配对,在进行重启手机,复位芯片,更换芯片之后,手机的蓝牙...
读特征(顾名思义,读取对应handle特征的值) 写特征(同上) 具体官方文档的API说明 三、整体连接流程 本例使用了gattc_multi_connect官方示例进行修改,官方示例完成了一个可以连接多个蓝牙设备的主机,主机连接设备的整体流程图如下: 这里流程图已经把GATTC扫描连接的过程描述得很清楚了,现在让我们通过官方提供的接口来...
ESP32,IDF版本5.1.2。连接某一ble设备,版本据说是5.0,没法验证,通过手机BLE调试APP操作反应正常,其通知和写特征值是分开的,注册NOTIFY服务后,写入成功后,设备会自动应答,但NOTIFY动作无反应。 Code:Select all I (7578) GATTC_DEMO: ESP_GATTC_CONNECT_EVT conn_id 0, if 3 I (7578) GATTC_DEMO: REMOTE...