程序使用arduino开发,附件有提供我使用的源代码,将附件的音频库解压到arduino的库文件夹即可使用 使用esp32-wroom开发板,使用开发板自带的串口可以直接上传程序,参数设置如图 6.备注 1.使用KICAD6.0绘制 2.PJ_DET = 耳机插入检测 3.PA_SW = 功放芯片使能(NS4150高电平启动、低电平关闭),详情看原理图或可视化BOM...
认识Arduino UNO之三: UNO原理图解读(认识ATmega8U2和ATmega16U2) /16K字节的Flash,支持自擦写功能。512字节EEPROM和512字节SRAM (8U和16U的不同处是Flash容量) 2)内置Boot-Loader功能。 3)支持USB全速,包含4个USB输入输出端口4)包含内置晶振。 5)操作电压范围为2.7V到5.5V。2.7V时,最大工作频率是8MHz,4.5...
instead of having to manually keep the two configs in sync. I suppose it depends if the shared bus is supposed to have a fixed frequency or if each component should take control and reconfigure it when active (preventing simultaneous use). ...