Prot. 5 (12A), 1-5. http://dx.doi.org/10.4236/ jwarp.2013.512A001.Heydari, M. M., and M. Heydari. 2013. "Calibration of Hargreaves-Samani Equation for Estimating Reference Evapotranspiration in Semiarid and Arid Regions." Archives of Agronomy and Soil Science 60 (5): 695-713. doi:...
Computational methods in the Warp code framework for kinetic simulations of particle beams and plasmas Summary form only given. The Warp code (and its framework of associated tools) was initially developed for Particle-in-Cell simulations of space-charge-dom... A Friedman,RH Cohen,DP Grote,......
Relationships for calibrating the C coefficient on the basis of annual average of daily temperature range (T) and wind speed (V) are proposed, calibrated, and validated. Hence, the CHS equation can be used for ET0 estimates with acceptable accuracy instead of the FAO-56 PM method....
the condition that no multiple threads are used for updating the current density of the same grid at the same time can be ensured; the data correlation between adjacent grids is eliminated; the reusability and high-efficiency access of the data are realized; and the operation speed of a CUDA...
(Paris, France) for the composite fan blades used in the LEAP aeroengine (see Learn More).To this point, however, the composites industry has been unable to take full advantage of the clothing industry's almost limitless ability to knit fabrics at high speed and mix different types of...
In addition, the values of diffusivities also significantly affect the speed of initial moisture uptake, which is about 1.5 times the difference of the initial values observed between Figure 3c,d. 4.2. Moisture Uptake of Resin Figure 4 illustrates the weight gain for resin under 60 °C at 100...
A common characteristic of this class of metaheuristics is the use of a greedy selection algorithm to expedite the convergence speed of the optimization process. The procedure outlined in Algorithm 4 is employed locally to choose the best candidate (i.e., the candidate solution with the best fitn...
for UV exposure were based on ISO 13934-1 [16], with the warp direction of the outer layer, moisture barrier, and thermal liner being 300 mm long × 55 mm wide. For the outer layer, the warp direction was 300 mm long × 50 mm wide, with approximately the same number of warp ...