8、执行yum install gcc-c++ 9、执行yum install readline-devel 10、进入base文件夹下,编译 11、编译完成后,进入etc/profile文件下,把下面内容粘贴进入并保存 export EPICS_BASE=/usr/local/epics/base export EPICS_ARCH=linux-x86_64 export EPICS_CA_ADDR_LIST=127.0.0.1:5064 export EPICS_CA_AUTO_ADDR_LI...
因为我现在进行的是主机内的通讯,需要更改 IOC 的启动脚本文件 st.cmd,将 IOC 的通道地址设置为本机,只需在“st.cmd”文件中加入如下语句: epicsEnvSet(“EPICS_CA_ADDR_LIST”,“localhost”) epicsEnvSet(“EPICS_CA_AUTO_ADDR_LIST”,“NO”) 其中“localhost”表示主机通讯,再次运行 IOC 时,将可以实现...
CA_ADDR_LIST=127.0.0.1:5064 export EPICS_CA_AUTO_ADDR_LIST=no export NODE_EPICS_LIBCA=/usr/local/epics/base/lib/linux-x86_64/libca export PATH=${EPICS_BASE}/bin/${EPICS_ARCH}:${PATH} 12. 执⾏source /etc/profile 13. 执⾏makeBaseApp.pl有下图提⽰，即表⽰环境部署完成 ...
vim ~/.bashrc,添加以下内容: EPICS_CA_ADDR_LIST = localhost EPICS_CA_AUTO_ADDR_LIST = YES EPICS_CA_MAX_ARRAY_BYTES = 16384 source ~/.bashrc 编译和启动 cd /home/$USER/epicsarchiverap-env make build make install make sd_start make sd_status 系统工具控制AA: systemctl start epicsarchiverap...
>> from pvaccess import * >> pv = PvObject({'x': INT, 'y': INT}) >> pvaServer = PvaServer('pair', pv) VERSION : pvAccess Server v6.0.0 PROVIDER_NAMES : local, BEACON_ADDR_LIST : AUTO_BEACON_ADDR_LIST : 1 BEACON_PERIOD : 15 BROADCAST_PORT : 5076 SERVER_PORT : 5075 RCV...
ASYN_CANBLOCK | ASYN_MULTIDEVICE,1,// autoconnectpriority, stackSize) {intaxis; motorSimControllerNode *pNode;if(!motorSimControllerListInitialized) { motorSimControllerListInitialized =1; ellInit(&motorSimControllerList); }// We should make sure this portName is not already in the list */pNode...
- a Channel Access (CA) client writes ON(1) to the STUP field which causes the motor record to set STUP to BUSY(2) and request a single controller status update. After the status is updated the record sets STUP to OFF(0). - CA client are restricted to writing ON(1) to STUP ...
pnode->l_num, ellCount(&pnode->bp_list), pnode->taskid); }/* * Print out breakpoints set in the lock set */pbl = (struct BP_LIST *) ellFirst(&pnode->bp_list);while(pbl !=NULL) {printf(" Breakpoint: %-28.28s", pbl->precord->name);/* display auto print flag */if(...
CA_ADDR_LIST IOC-9999-IocStats:CA_AUTO_ADDR YES IOC-9999-IocStats:CA_BEAC_TIME 15.0 IOC-9999-IocStats:CA_CLNT_CNT 0 IOC-9999-IocStats:CA_CONN_CNT 0 IOC-9999-IocStats:CA_CONN_TIME 30.0 IOC-9999-IocStats:CA_MAX_ARRAY 16384 IOC-9999-IocStats:CA_RPTR_PORT 5065 IOC-9999-IocStats:...
you want to rebuild the java version then read this section. If you just want to use caxy then the pre-builtcaxy.jarshould be enough on any platform that supports at least java-1.6 (you can rebuildcaxy.jarunder 1.5. This will work, too, but you won't have auto_addr_list support....