Error: The next-hop address is invalid. [r3]ip route-static 192.168.1.0 24 192.168.5.1 preference 50 测试一下连通性 删除一条路径,尝试连通性
Bind Session Type : Dynamic Bind Peer IP Address : -.-.-.- NextHop Ip Address : -.-.-.- Bind Interface : Ethernet1/0/1.1 PW TTL Mode : - PW TTL : - Node : UPE Encapsulation Type : - Vc Id : - Track Interface : - Local Vc Label : 48124 Remote Vc Label : 48125 Swap Vc...
next-hop address:去往目的网络的下一跳ip地址 exit interface:去往目的网络的出站接口 administrative distance:修改静态路由管理距离。默认情况下,静态路由的管理距离是1,如果你用exit interface代替next-hop address,那么管理距离是0。 permanent:如果接口被shutdown或者router不能和下一跳通信,这条路由将自动从路由表...
The number of interface that is UP in Physical is 2 The number of interface that is DOWN in Physical is 1 The number of interface that is UP in Protocol is 2 The number of interface that is DOWN in Protocol is 1 Interface IP Address/Mask Physical Protocol GigabitEthernet0/0/0 12.1.1.1...
Destination/Mask Proto Pre Cost Flags NextHop Interface 11.1.1.1/32 OSPF 10 1 D 12.1.1.1 Ethernet0/0/0 33.1.1.1/32 OSPF 10 1 D 23.1.1.3 Ethernet0/0/1 在R3 上查看: [R3]display ip routing protocol ospf Destination/Mask Proto Pre Cost Flags NextHop Interface ...
Destination/Mask Proto Pre Cost Flags NextHop Interface 11.1.1.1/32 OSPF 10 1 D 12.1.1.1 Ethernet0/0/0 33.1.1.1/32 OSPF 10 1 D 23.1.1.3 Ethernet0/0/1 在R3 上查看: [R3]display ip routing protocol ospf Destination/Mask Proto Pre Cost Flags NextHop Interface ...
EVPN address family: Number of Mac Routes: 6 Route Distinguisher: 1:1 Network(EthTagId/MacAddrLen/MacAddr/IpAddrLen/IpAddr) NextHop *> 0:48:5489-98fd-0378:32:192.168.1.1 0.0.0.0 *> 0:48:707b-e8ad-235d:0:0.0.0.0 0.0.0.0 ...
IBGP使用虚拟下一跳实现等价路由负载均衡:IBGP选路最优的路由,通过策略修改该路由的next-hop为一个虚拟地址,该虚拟地址同时配置在2台需要等价的设备上。BGP路由协议在根据next-hop属性转发时会进行IGP迭代,发现下一跳IP有2个等价IGP路由,故出接口被迭代到2个链路上实现等价均衡。
Error: The network address is invalid, and the specified address must be major-n et address without any subnets. [AR8-rip-1] AR7 <AR7>sy Enter system view, return user view with Ctrl+Z. [AR7]rip [AR7-rip-1]net 12.0.0.0
Error: The network address is invalid, and the specified address must be major-n et address without any subnets. [AR8-rip-1] AR7 <AR7>sy Enter system view, return user view with Ctrl+Z. [AR7]rip [AR7-rip-1]net 12.0.0.0