Make sure the print bed is level and the nozzle is neither too far nor too close to the print bed. Slow the print speed down to give the first few layers time to adhere and cool off. Also, try lowering the extruder temperature. Stringing or fly-away filament If your model is covered...
For newcomers, this is the most common problem. Do not worry, you can solve it easily. Generally, the distance between the nozzle and platform is too far or near. So rotary the knob under the platform to adjust the distance between the nozzle and platform again, at a piece of A4 paper...
* Add the G34 command to align multiple Z steppers using a bed probe. */ //#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) /** * Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] * These positions are machine-relative and do not shift with the M206...
Now you can do both from bed with a laptop in hand [3][4]. Like the CNT said after the Gamma Group hack: "Let's take a step forward with new forms of struggle" [5]. Hacking is a powerful tool, let's learn and fight!