Since commit 7b3b74d ("serial: serial_stm32: Enable overrun") on STM32F7xx based boards, the first lines of serial output are missing during boot (we no more see the U-Boot release version, board model and DRAM size). By enabling the uart FIFO on STM32F7, the complete U-boot log...
开发者ID:Lembed,项目名称:STM32CubeF4-mirrors,代码行数:36,代码来源:stm32f4xx_hal_msp.c 示例2: prvHardwareUartGpioInit ▲点赞 6▼ voidprvHardwareUartGpioInit(UART_HandleTypeDef *huart){ GPIO_InitTypeDef GPIO_InitStruct;/* Enable GPIO TX/RX clock */USARTx_TX_GPIO_CLK_ENABLE(); USARTx_RX...
voidUART_Initialize(){/* Enable clocks for GPIO port containing _USART and USART */rcc_peripheral_enable_clock(&_USART_RCC_APB_ENR_IOP, _USART_RCC_APB_ENR_IOP_EN); rcc_peripheral_enable_clock(&_USART_RCC_APB_ENR_USART, _USART_RCC_APB_ENR_USART_EN);/* Enable DMA clock */// TODO ...
This PR will add new features of the PWM ESP32 port to enable the use of PWM in ligth sleep mode of the ESP32 series as reported in https://github.com/orgs/micropython/discussions/16033 To perform this we need to add clock source selection of the timer used by the PWM Channel, this...
media: hantro: add support for STM32MP25 VDEC Nícolas F. R. A. Prado: selftests: Move KTAP bash helpers to selftests common folder Sebastian Reichel: arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588 Acked-by: Helen Koike: ...
4) What SPI clock speeds have you used? SPI Mode? 5) Do you have any thoughts on the Lantronix Xport (ethernet <-> uart) modules? Do they work the same as the enc28j60 but use rs232 instead of spi? I’ve seen some videos for it and it seems to work without any extra code on...
开发者ID:atu-guda,项目名称:stm32oxc,代码行数:62,代码来源:bsp_sdram_msp.cpp 示例11: hal_gpio_clk_enable ▲点赞 1▼ /** * hal gpio clk enable * * Enable the port peripheral clock * * @param port_idx */staticvoidhal_gpio_clk_enable(uint32_tport_idx){switch(port_idx) {case0:if...
开发者ID:fcayci,项目名称:px4bootloader,代码行数:32,代码来源:main_f4.c 示例6: CHAN_Init ▲点赞 1▼ voidCHAN_Init(){rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN);rcc_peripheral_enable_clock(&RCC_APB2ENR...
开发者ID:atu-guda,项目名称:stm32oxc,代码行数:55,代码来源:stm32f446_clock_HSE192.c 示例5: SystemClockCfg ▲点赞 1▼ intSystemClockCfg(void){ RCC_OscInitTypeDef RCC_OscInitStruct; RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; ...
voidRaw32OSInit(void){/* Enable the CPU Cache's */SCB_EnableICache();// Enable I-CacheSCB_EnableDCache();// Enable D-Cache/* STM32F7xx HAL library initialization: - Configure the Flash ART accelerator on ITCM interface - Configure the Systick to generate an interrupt each 1 msec ...