If U-Boot was not able to get an IP address from the DHCP server, you might need to manually set the serverip and ipaddr u-boot> dhcp u-boot> setenv serverip 10.10.x.x -- This is host machine ipaddress where tftp server is running u-boot> setenv ipaddr 10.10.x.y -- This i...
%SystemRoot%\system32\TFTPLog Component Name: Installation - Configuration Management Primary Path to Service Executable:Windows: setup.exeLinux: sh /media/cdrom/setup.shEnable Debugging: Windows server:setup.exe -j -DLogger.logLevel=(FINE|FINER|FINEST)orsetup.exe –debug (defaults to FINER) ...
#setenv serverip 192.168.2.1 #tftp server IP #saveenv #reset #ping 192.168.2.1 #check if network access is available #tftp ${loadaddr} uImage-3.6.35 #loadaddr takes two arguments: the address to load the file into and the filename of the image on the TFTP server ...
%SystemRoot%\system32\TFTPLog Component Name: Installation - Configuration Management Primary Path to Service Executable:Windows: setup.exeLinux: sh /media/cdrom/setup.shEnable Debugging: Windows server:setup.exe -j -DLogger.logLevel=(FINE|FINER|FINEST)orsetup.exe –debug (defaults to FINER) ...
As for tftp-server, if you must use it, dedicate one system or virtual machine to it and install it into a chroot jail for better security. *While vsftpd encrypts communications, this function is better handled by SSH/SFTP/SCP. Disable host-based authentication Remove all instances of host...
Running postinst /etc/rpm-postinsts/103-util-linux-readprofile... Running postinst /etc/rpm-postinsts/104-inetutils-telnetd... Running postinst /etc/rpm-postinsts/105-inetutils-tftpd... Running postinst /etc/rpm-postinsts/106-inetutils-ftpd... update-rc.d: /etc/init.d/run-postinst...