Enabling Secure BootSecure Boot is controlled by the computer firmware (BIOS) and can be enabled with a few simple steps: Boot your computer. Tap the F2 key when the Dell logo appears to enter the BIOS. The following steps can vary based on your computer model: Alienware, In...
To activate the TPM on your Dell computer in BIOS, perform the following steps Reboot your computer. Press F2 once a second when the Dell logo appears. Once in the BIOS, see the section that corresponds to the brand of your computer, for more instructions. NOTES: Dep...
You can setup two different types of passwords in DELL BIOS: System Password: This will be prompted before the system can boot up, and load the operating system. Setup password: The system will prompt for this password only when you are trying to access the BIOS settings. Depending on your...
在BIOS中禁用Secure Boot(安全启动)。 在Security Settings(安全设置)下:禁用PTT、启用TPM、激活TPM,然后保存更改 重新启动操作系统并启用BitLocker 完成此操作后,BitLocker应在TPM上正常运行。 此配置当前可在Dell Latitude 10/ST2和Venue 11设计中看到。将来系统也可能包括此技术。 返回顶部...
To add the DVD Boot option manually in the Dell Phoenix BIOS setup. Follow the steps provided below: Boot mode should be selected as UEFI (Not Legacy). Secure Boot set to Off Note: If the computer is not set to boot to UEFI, change...
在Dell Phoenix BIOS 设置中手动添加 DVD 引导选项。 按照下面提供的步骤操作: Boot Mode 应选择为UEFI(而不是传统模式)。 Secure Boot(安全启动)设置为Off(关闭) 提醒:如果计算机未设置为启动至UEFI,请在启动期间通过 BIOS (F2) 或一次性启动 (F12) 菜单对其进行更改。
在BIOS中禁用Secure Boot(安全启动)。 在“安全设置”下:禁用PTT、启用TPM、激活TPM,然后保存更改 重新启动操作系统并启用 BitLocker 完成此操作后,BitLocker应在TPM上正常运行。 此配置当前可在Dell Latitude 10/ST2和Venue 11设计中看到。将来系统也可能包括此技术。
Press F2 once a second when the Dell logo appears. Once in the BIOS, see the section that corresponds to the brand of your computer, for more instructions. NOTES: Depending on your computer model, you may be able to navigate the BIOS using your mouse. If not, navigate with the up ...