Once you know the width of each stripe, use your tape measure, level, and painter's tape, and start taping off the wall where the stripes should be. Make sure to press firmly on the edges of the tape. Run your finger along the edge, or use something like a credit card. This will ...
We assembled the other side of the desk the same way, then connected the two sides together by attaching the 50″ pipes using the available fittings. Donnie wanted to have two pipes connecting horizontally rather than just one so that he could have a foot rest. (And after testing it out,...
First, using the cloth measuring tape, measure the circumference of the box and add 1/2 inch. This measurement will be the width of the wrapping paper square. Next, measure the height of the box, add an inch plus 3/4 of the depth of the box. This will be the height of the wrappin...
I cut various holes and so on into the top, "inside can", a large central hole to fill it and light it from, and lots of tiny holes all the way around the outside of the top can, if you can picture that. Thus, as maybe you have by now worked out, when I filled it with al...