1、开机并连续按下“F2”键进入bios设置，进入bios设置菜单后，通过←→方向键选择Main选项，在Main的主菜单下，将光标移至“F12 Boot Menu”选项并按回车键确认，在弹出的窗口中将“Disabled”默认选项更改为“Enabled”。2、完成以上的bios设置后，我们按F10键保存并自动退出重启电脑，此时我们将已经使用...
1、开机按F2进入BIOS。2、方向键切换到BOOT项。3、将1ST BOOT 修改为CDROM按F10保存更改。重启时光驱有光盘，就会自动载入光盘。开机按F2进bios，在boot项里选择dvd为第一启动项。或者选简单点的，进入bios后，在main页面把F12 boot menu 项改成"enable",保存重启， 开机时按F12，此时可随意选择启动...
9 tinkerer edited january 2024 i did try to reseat them before and did so again but it didn't really help, the connectors looked clean and good anyway but did clean it either way, it didn't change anything. 0 > >connecting a different harddrive to the laptop.> > does the bios ...
在淘宝,您不仅能发现ACER E1-572G COMPAL LA-9531P (V5WE2) 主板BIOS的丰富产品线和促销详情,还能参考其他购买者的真实评价,这些都将助您做出明智的购买决定。想要探索更多关于ACER E1-572G COMPAL LA-9531P (V5WE2) 主板BIOS的信息,请来淘宝深入了解吧!
updating the bios. power drain test or reset. connecting a different harddrive to the laptop. yes i did unscrew the laptop to check on it from the inside and it wasnt that dirty. also checked the ports and they seemed ok. something i noticed was when i removed the hard drives from the...
1、开机看到ACER界面时,按F2键进入BIOS界面先选择MAIN选项中把D2D Recovery的选项设置为Enabled。此点一定要确认，否则，无法进行一键盘还原操 2.按F10保存退出在看到ACER界面时,按ALT+F10 (建议是按住Alt键不放，快速按F10)如出现选择Acer eRecovery这个选项按回车键出现，然后选择"恢复系统至出产默认设置...
BIOS Update BIOS to thelatest version. This resolves the issue of the laptop failing to fully power down when shutting down. Configure BIOS with these settings: Secure Boot→Disabled You can only toggle this setting if a BIOS password is set. Temporarily add password to set this setting. To...
1、 开机看到ACER界面时,按F2键进入BIOS界面先选择MAIN选项中把D2D Recovery的选项设置为Enabled。 此点一定要确认，否则，无法进行一键盘还原操2.按F10保存退出在看到ACER界面时, 按ALT+F10 (建议是按住Alt键不放，快速按F10)如出现选择Acer eRecovery这个选项按回车键出现，然后选择"恢复系统至出产默认...
刷BIOS.无果 测量发现1.05V电感。只有0.35V 测量PU601芯片各脚对地值，没发现异常 PIN1：EN=开启...
I have an Acer Aspire E1-572G laptop which comes with a AMD Radeon R5 M240 GPU. For some reason, the laptop cannot detect the graphics card. I have tried a lot of different ideas and nothing has worked. I was wondering if this could be something that can be solved in the BIOS?