在檔案總管(在 Windows 7 及舊版 Windows中稱為 Windows 檔案總管)中未發現您的 CD 或 DVD 光碟,並且在裝置管理員中為該裝置標示黃色驚嘆號。 此外,在您開啟裝置的屬性對話方塊後,裝置狀態區域中會列出以下錯誤之一: Windows 無法啟動這個硬體裝置,因為它的設定資訊 (在登錄中) ...
The only suggestion I can offer if the DVD drives are not being recognized would be to go through Microsoft's troubleshooting steps at the link below: Start with methods 4, 5 & 6. Your CD or DVD drive is not recognized by Windows or other programs - Microsoft Support Reply Was this ...
文件资源管理器中未显示 CD 或 DVD 驱动器(在 Windows 7 和旧版 Windows 中称为 Windows 资源管理器),并且设备在设备管理器中标有黄色感叹号。 此外,在打开设备的“属性”对话框后 , “设备状态”区域中会列出下列错误 之一: 由于其配置信息(注册表中的)不完整或已损坏...
This document assumes that your CD or DVD drive is recognized by Windows and is capable of reading discs. If your disc burning software displays the messageNo burner is currently available(or similar), or the drive cannotplayCDs and DVDs, then this document does not solve the problem. Instead...
t play on Windows 10 when you insert your disc into the disc drive. The causes of this problem can be that your Windows 10 does not have a proper DVD playback software, or that something is wrong with your CD/DVD drive. If you are troubled by this problem, why not try the ...
This document assumes that your CD or DVD drive is recognized by Windows and is capable of reading discs. If your disc burning software displays the message No burner is currently available (or similar), or the drive cannot play CDs and DVDs, then this document does not solve the problem....
Operating System: Microsoft Windows 10 (64-bit) Having refreshed my system with Windows 10, I've had a few issues. I had help from this forum on solving all the issues, except for one: My dvd drive is not being recognized...message I receive is: "E:/Dir...
Had problem on my T60, DVD/CD not recognized and drive shown as problem. Have two T 60s so swapped drives, bad one worked in other T60 so I knew it wasn't hardware, had to be driver? Found this solution from MicroSoft support web site. Has self activated install and ...
Restart Windows. Windows will automatically detect and reinstall your DVD-ROM or CD-ROM drives. You can verify that the drives are installed by viewing them in Device Manager (see step 9). If the drives are not present, open Device Manger and choose Actions > Scan For Hardware Changes. ...
If the drive is not correctly recognized by Hasleo WinToUSB, you can click the button for the program to recognize the drive.Step 5. Choose the partition scheme and installation mode according to your needs.* Partition scheme: MBR for BIOS: This option creates a Windows To Go USB that ...