Awtoniuk, "Estimation of tensile strength of ductile iron friction welded joints using hybrid intelligent methods," Transactions of Nonferrous Metals Society of China, vol. 23, pp. 385-391, 2013.Winiczenko, R.; Sałat, R.; Awtoniuk, M. Estimation of tensile strength of ductile iron ...
Home Products Ductile Iron EN-GJS-500-7C EN-GJS-500-7C EN-GJS-500-7C, also known as GGG50, is a material with a predominately ferric/pearlitic structure and is one of the most commonly used in the ductile iron family. This grade offers good tensile strength and a satisfactorily high...
60-40-18 ductile iron is specified to have a minimum tensile strength of 60 ksi (414 MPa), a yield strength of 40 ksi (276 MPa) and an elongation of 18%. Ferritic, annealed. Applications include pressure-containing parts for use at elevated temperatures, valves and fittings for steam and...
65-45-12 is the material grade of ductile iron ANSI / ASTM A536 65-45-12. This grade has higher tensile strength but lower elongation. The followings are its physical, chemical properties and its application. Physical Properties: Tensile strength min. 448 Mpa, Yield strength min. 310 Mpa, ...
Dura-Bar 60-40-18 is a nodular iron with a fully ferritic matrix. This iron grade’s microstructure is achieved through annealing and offers excellent ductility and impact strength. Dura-Bar 60-40-18 has the most ductility out of the ductile iron family of Dura-Bar. Annealed Dura-Bar isNA...
GB T 1348 1998 Standard for Ductile Cast Iron provided by Dandong Foundry in China, an iron foundry producing gray iron, ductile iron and steel castings.
Ductile Iron DCI (A395)Ductile Iron DCI (A395)Bulletin A/6i w
High-strength ductile ironengineered coolingthermal simulator techniquesComputational Fluid Dynamics (CFD)tensile strengthTraditionally, high strength ductile irons are produced by a combination of alloying and heat treatment, both operations substantially increase the cost and carbon footprint of casting ...
This study focused on tensile strength properties inclusive of ultimate tensile strength and elongation values of niobium alloyed ductile iron in as cast and austempered conditions. The tensile specimens were machined according to TS 138 EN 10002-1 standard. Austempering heat treatment was conducted by...
MaterialDuctile iron,ASTM A536/QT450-10 TechnicsCasting Working pressure300Psi/2.07Mpa Tensile strengthMin.Psi-65,000 (Mpa-448) Yield strengthMin.Psi-45,000 (Mpa-310) ElongationMin.12% Surface finishEpoxy powder,Paint,Galvanized,Dacromet,Dipping Paint ...