Then in startup enable legacy boot.Save the changes and exit (F10) and boot into windowsInstalling UbuntuNow in Windows run the same command as beforeshutdown.exe /r /o /f /t 00This will bring up the following options, choose “Use a Device”...
Then in startup enable legacy boot.Save the changes and exit (F10) and boot into windowsInstalling UbuntuNow in Windows run the same command as beforeshutdown.exe /r /o /f /t 00This will bring up the following options, choose “Use a Device”...
My setup was a office laptop (Lenovo X1 Carbon) with Trusted Platform Module (TPM), secure boot and Bit-locker enabled. My goal is to dual boot Ubuntu 15.10 with Windows 10.Setup the installer USBGet a USB thumb drive and format it as FAT32. NOTE: Do NOT use NTFS, otherwise the ...
Insert the Windows USB drive, restart your computer, and boot from the USB. If your system doesn’t boot from the USB, you need to enter the BIOS/UEFI (typically by tappingF2ordelwhile the system is booting up) and change the boot order so your USB drive is listed above the drive th...
I recently decided to dual boot Ubuntu alongside Windows 10 on myLenovo IdeaPad gaming 3 (15ARH05), so for that I created an iso image of Ubuntu 20.04 on a USB stick and followed all the procedures of standard dual boot installation.I selected my usb at the boot menu a...
Re:Thinkstation P340 Win10+Ubuntu dualboot? Hello, Have you used a tutorial from Ubuntu? One is here: https://ubuntu.com/tutorials/install-ubuntu-desktop#1-overview A trick I found to work on other OS installs, is to first shrink my Windows Partition, then leave the empty space as u...
boot.repair@gmail.com or to your favorite support forum. You can now reboot your computer. Please do not forget to make your BIOS boot on sda2/EFI/ubuntu/shimx64.efi file! If your computer reboots directly into Windows, try to change the boot order in your BIOS. ...
首先在win8上腾出一个100G左右的盘用(在Windows中把他删除)来装Ubuntu系统。 然后在官网下载Ubuntu 16.04.2 LTS安装镜像。最开始时,系统设置的引导是boot: legacy support,boot priority: uefi first。这时BIOS的设置,应该是支持legacy,但是首先使用uefi。如果这个时候去安装Ubuntu,在分区时: 点击 cobbler UEFI 启...
1. Hit F10 to enter bios at boot time: a. Goto System Configuration b. Enable Legacy Support c. Disable Secure Boot d. Set Legacy Boot Order as desired 2. Hit F9 at boot time and enter Ubuntu, open terminal and enter the following command: sudo efibootmgr The efibootmgr command gives...
I have a Hades Canyon NUC with 2 physically separate NVMe drives, one has Windows 11 (insider preview) on it and the other has (k)ubuntu on it . My boot process is that Grub loads first, and defaults to the (k)ubuntu installation, in which I use terminal to instruct Grub to boot...