群晖DS212J安装说明书_chs
5RESET按钮后方面板2.重 新安装SynologyDiskStation。6网络埠后方面板LAN埠是将RJ-45网络线接 上SynologyDiskStation的插孔。7电源埠后方面板电源埠是将变压器接上 SynologyDiskStation的插孔。4第1章:事前须知安全须知切勿将产品放置在 直接受阳光曝晒或靠近化学药剂的场所。请确保其所在环境恒定温度与湿度的维 持。切勿...
5) RESET Button Back Panel 2.To reinstall the Synology DiskStation. 6) LAN Port Back Panel The LAN port is where you connect RJ-45 cable to Synology DiskStation. The power port is where you connect the AC power adapter to 7) Power Port Back Panel Synology DiskStation. 4 Chapter 1: ...
my DS212j is working fine, but everytime I reboot the NAS, the DNS Server settings are reset to 172.16.0.4 which appears to be the NAS itself. However, the network DNS Server is 172.16.0.6 which is up an running. Once the NAS has been rebooted, I must update the DNS Server value ...
Should I just call it a day and throw this old NAS out? Or, would it be good to repurpose it with something like a Raspberry PI or Chromebook? TIA, Sid PS: Reset had no effect Responses (1-1) Sorted by Oldest LatestMost likesMost comments ...
I now have it reset (no running system) and accessible only via serial console. Booting it will have it throwing network errors the moment eth0 comes up: [ 55.100000] bad rx status 2cc7fff9, (crc error) [ 55.230000] bad rx status 2cc7fff9, (crc error) [ 55.560000] bad rx status ...
Tried to do a hard reset on the back of the NAS. Held it the button in for about 20 seconds. No response. About 1 minute later I got a beep and the Blue LED started flashing again. Tried to press the hard reset again and the same thing: no response they a double beep after ...
IF i plug the eithernet cable from my laptop if will find the diskstation just fine and I pressed the reset on the back of my DS212J and then did a set up again on it and it works fine but then when I hook the DS212J back into the network and try to find it on my laptop ...
- Did a mode 1 and mode 2 reset of the NAS installing the latest version of DSM (6.2.1-23824 Update 2) folling the mode 2 reset. - Connected the NAS to a different switch - Checked the DHCP settings on the DHCP server to ensure that there were sufficient IP address available (I ac...
Mar 16 01:08:38 kernel: [179592.000000] ata1: wake up from deepsleep, reset link now Mar 16 01:08:38 kernel: [179592.070000] ata1: device plugged sstatus 0x123 Mar 16 01:08:38 kernel: [179595.010000] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen Mar 16 ...