void SPI_Flash_Read(u32 ReadAddr) { long int i; SPI_FLASH_CS=0; // SPI1_ReadWriteByte(W25X_ReadData); // SPI1_ReadWriteByte((u8)((ReadAddr)>>16)); // SPI1_ReadWriteByte((u8)((ReadAddr)>>8)); SPI1_ReadWriteByte((u8)ReadAddr); printf("%c",SPI1_ReadWriteByte(0XFF))...
ESP FLASH TOOL 是 Espressif 官方开发的烧录工具,用户可根据实际的编译方式和Flash的容量,将SDK编译生成的多个bin文件一键烧录到 ESP8266/ESP32 的SPI Flash中。 ESP FLASH TOOL 的官方下载地址为: http://www.espressif.com/sites/default/files/tools/flash_download_tools_v3.4.9.2_1.zip 若上面版本下载失败...
[0;32mI (45) boot.esp32: SPI Mode : DIO[0m [0;32mI (49) boot.esp32: SPI Flash Size : 16MB[0m [0;32mI (54) boot: Enabling RNG early entropy source...[0m [0;32mI (59) boot: Partition Table:[0m [0;32mI (63) boot: ## Label Usage Type ST Offset Length[0m ...
Standard SPI: CLK, /CS, DI, DO, /WP, /HoldDual SPI: CLK, /CS, IO0, IO1, /WP, /HoldQuad SPI: CLK, /CS, IO0, IO1, IO2, IO3 据我所知,用ESP8266的朋友中有一部分是不懂SPI的,这里没关系,你可以根据你所使用的模组的...
rst:0x10 (RTCWDT_RTC_RST),boot:0x8 (SPI_FAST_FLASH_BOOT) SPIWP:0xee mode:DIO, clock div:1 load:0x3c020020, [10:44:50.554]收←◆len:0xb1c0 [10:44:50.570]收←◆ets_loader.c 78 :\Users\ADMINI~1\AppData\Local\Temp\arduino_build_49009/order_T.ino.bootloader.bin0x8000C:\Users\...
Note that I'm not sure why it is trying to connect at 115200 baud, as both in the tool UI and in spi_download.conf the baud is set as 460800. Code:Select all [LOG_CHECK]log_check_baud=460800[ESPTOOL_PARAM]baud=460800 What do I need to do to make it work?
• 使用flash_download_tool工具下载程序到ESP32-C3-WROOM-02模组上后一直重启怎么解决? 271 • ESP32 SPI闪存通信收到错误信息的原因?如何解决? 421 • ESP Flash Download Tool 2.4错误覆盖相邻的扇区怎么解决? 311 • ESP32-WROM-32UE烧写AT固件,串口接电脑发AT指令无反应是怎么回事? 304 提交...
This is why the value may be different when the binary is combined by the flasher tool - if the SPI flash speed, mode and size set in the flasher tool UI don't match what was set when the binary was built then they will get changed. The mode and the speed are printed by the ESP...
2、进入FLASH_DOWNLOAD_TOOLS_v0.9.3.1文件夹,打开frame_test.exe3、在0x00000上导入nodemcu_float_0.9.6-dev_20150406.bin或者nodemcu_integer_0.9.6-dev_20150406.bin,并在前面打上勾。4、SPI SPEED 选择40MHz,SPI MODE 选择DIO,FLASH SIZE 选择32M。5、com选项选择模块所连接电脑的串口。6、波特率选择1152007...
一、下载烧录软件EspFlashDownloadTool:https://www.espressif.com/zh-hans/support/download/other-tools 下载页面 二、设置烧写选项(以NodeMcu(ESP12e或者ESP12f)为例) 1.选择烧录文件 2.选择晶振频率26M,SPI速度和模式:40MHz和DOUT,最后选择FLASH大小32M ...