{"storage-driver":"overlay2","storage-opts":["size=20G"]} 1. 2. 3. 4. 5. 6. 通过上述输出,我们可以看到 Docker 的存储驱动以及 DOCKER_STORAGE_OPTIONS 的设置。 2. 通过 Docker 命令行接口 还可以通过 Docker 提供的命令行接口,直接查询 Docker 的当前运行状态。使用以下命令查看 Docker 存储驱动:...
2. 编写脚本查看DOCKER_STORAGE_OPTIONS 我们可以创建一个Bash脚本来获取Docker的存储选项配置: #!/bin/bash# 查看Docker的DOCKER_STORAGE_OPTIONS配置if[-f/etc/docker/daemon.json];thenecho"DOCKER_STORAGE_OPTIONS配置:"cat/etc/docker/daemon.json|grep-i"storage-driver"elseecho"未找到Docker配置文件"fi 1. ...
Docker supports the following types of storage mounts for storing data outside of the writable layer of the container: Volume mounts Bind mounts tmpfs mounts Named pipes No matter which type of mount you choose to use, the data looks the same from within the container. It is exposed as eith...
Home/Manuals/Docker Engine/Storage By default all files created inside a container are stored on a writable container layer that sits on top of the read-only, immutable image layers. Data written to the container layer doesn't persist when the container is destroyed. This means that it can ...
服务docker-storage-setup默认会尝试使用root文件系统所属的vg, 即centos vg,但是由于该vg上已经没有剩余空间,从而导致devicemapper驱动配置失败。 减小home lvm的大小创建docker lvm CentOS 7默认安装程序创建的home lv空间一般比较大,先减小其大小: lvresize-L -50G/dev/centos/home 重新创建并挂载home文件系统 umoun...
Docker image是由一系列的layer构建的,每个layer对应Dockerfile中的一条指令。每个layer只记录与前一个layer的区别,不同layer之间的交互由storage driver处理。下面是Dockerfile的示例。 FROMubuntu:18.04COPY. /appRUNmake /appCMDpython /app/app.py 当运行docker image生成container后,会在image layers之上创建可读写的...
数据管理,即跨主机docker存储 从业务数据角度看,容器分:stateless容器和stateful容器 stateless指容器在运行过程中不需要保存数据,每次访问的结果不依赖上一次访问,如静态页面 stateful指容器需要保存数据,而且数据会发生变化,访问的结果依赖之前请求的处理结果,如
docker storage driver docker默认有2种方式用于持久化数据,volumes和bind mounts,也可以使用tmpfs,其中使用volume是持久化数据的最好方式,volume由docker控制管理,使用docker volume create创建一个volume时,其目录会生成到/var/lib/docker/volumes目录下。volumes和bind mounts用于将数据持久化到硬盘中,tmpfs的数据只存在...
发现再次使用--storage-opt参数约束容器文件系统大小时不会报错,并且成功约束。 结束,马内到手。 docker运维ubuntulinuxkubernetes 阅读5.5k更新于2024-10-14 李朝阳 55声望15粉丝 人生到处知何似,应似飞鸿踏雪泥 « 上一篇 jenkins+gitlab+k8s实现代码的自动发布+手动发布 ...
以往,本地存储是通过存储驱动(Storage Driver)进行管理的,有时候也被称为 Graph Driver 或者 GraphDriver。 虽然存储驱动在上层抽象设计中都采用了栈式镜像层存储和写时复制(Copy-on-Write) 的设计思想,但是 Docker 在 Linux 底层支持几种不同的存储驱动的具体实现,每一种实 现方式都采用不同方法实现了镜像层和写...