Connecting to a USB Flash Drive for Device Upgrade You can upgrade the SmartLogger, solar inverter, MBUS module, or PID module using a USB flash drive. Save the device upgrade package to the USB flash drive. Do not decompress the upgrade package. Connect the USB flash drive to the USB ...
Ensure that no other interface is added in trunk mode to the VLAN where internal loopback interfaces reside, so as to prevent traffic from being broadcast within the VLAN. Figure 9-23 Connecting to multiple monitoring devices through internal loop...
iphone 11 not connecting to my bluetooth devices that have been set up My iPhone 11 will not connect automatically to my devices which have been set up in the past. They show on the list of available connections, but I have to select it to connect. It used to do it automatically. 4...
On other devices you will need to pair your Galaxy Buds manually. Once your devices are paired they will remember the connection and connect automatically the next time they are used. Connecting to a Samsung device Connecting to a non-Samsung Android device Manually connecting your Galaxy Buds...
It could also be that the client connecting or the server hosting (or both) do not support Server Name Indication (SNI). An example of this would be if you have example.com (default site) and example.org hosted on the same IP. You have certificates for both and they are both configure...
Devices running Android 10 and iOS 14 or later have a security feature that periodically changes their media access control (MAC) addresses when connecting to a network. For both operating systems, this feature is enabled by default. Note: Devices with below iOS 14 and Android 10 do not inc...
You will be redirected to your device or app login page in order to allow Cathay to access the data. Please enable all permissions when connecting your device to ensure the device can sync correctly. Once a device is connected, it will appear at the top of the dev...
Tap the first HTC Sync Manager notification, and then tap Allow each time you're prompted to grant HTC Sync Manager access to your data.Check the cable connection Try connecting to different USB ports. Make sure you connect your phone to a USB 2.0 port on your computer. Try a different...
If your Wi-Fi router is too far, chances are you’ll have a hard time connecting to the network. And if you manage to connect to it, it might not work very well, as you’ll likely have a weak signal. Many factors can affect Wi-Fi performance. Any kind of interference can weaken ...
booting from a usb drive involves connecting an external storage device (e.g., thumb/flash drives) to your machine before restarting and then selecting it as the primary bootup option. this then loads up the selected device's contents onto your system instead of what was already present ...