3. It is possible that your kit door may come unassembled and need to be assembled using the 7 inch lag screws through the side of the stiles. 4. For both Unassembled and Assembled doors... the hardware (hangers, handles and pulls) is not installed and the doors are not pre-drilled ...
Since my closet is so narrow, I knew the rods provided in the kit were going to be too long. The instruction guide advises to “cut the rods” if necessary. This is where I was a bit stuck because I didn’t have anything to cut the metal rods. So, rods in hand, I went off to...
You can make your own door jamb gaskets simply by taping rubber or foam gasket material around the door perimeter. It’s a budget-friendly option, but it also lacks the performance that aprofessional kitoffers. Premade jamb seals offer a cleaner, more professional look while delivering better s...
An oscillating multitool is a saw, scraper, sander, and grinder in one handy power tool. Here are some of the jobs you can tackle with an oscillating tool.
but for the DIYer using a wood epoxy like Abatron is usually my suggestion. Abatron makes a great 2 part system calledLiquidWoodandWoodEpoxthat are a structural epoxy that can be used to rebuild any damaged or missing wood. They even makea convenient kit that includes everything you need. ...
The first kit includes the spring anchor bracket, and the second includes the end bearing plates. We sell both kits with the necessary hardware to complete the EZ-SET conversion. 3. Unplug the power cord to the garage door opener. Some older openers are hardwired, and you will need to ...