You now have the ability to define the match direction (forward, reverse, both) and threshold at the individual field level when using the Dice Engine. This capability allows you to configure GTM’s RPLS matching logic to calculate a match factor for the forward case i.e., match factor bas...
respectively, and all but three of the top 20 have occurred since 2000, during which time California's temperature has routinely been well above the historical average. We have
Transfer (Shaper) Grid module: Now maps the input and output to match the bipolar/unipolar state of the device This is a change to how unipolar cases were handled before; to restore the old behavior, add a Bi → Uni (Level) module before the Transfer Note Delay (Note FX) device:...
Bidirectional data transfer protocol Write protect pin for hardware data protection 8-byte page (1K, 2K), 16-byte page (4K, 8K, 16K) write modes Partial age writes allowed Self-timed write cycle Principle of operation of EEPROM The EEPROM uses the principle same as that of the UV-EPROM....
There are three exit modes: Normal exit (default behavior with no modifier key): Always use normal exit if you don’t have problem with slow shutdown of the application. Closes the application and closes any open projects. Manually releases all consumed memory by the application and plugins. ...
You can either drag one of these points to another point, or right-click on any point and choose the appropriate option — either Set Hold Point (when in Hold mode), or Set Loop Start / Set Loop End (when in Looping or Ping Pong modes) ...