Back Accessories Bushings, Grommets Cable and Cord Grips Cable Supports and Fasteners Cable Ties - Holders and Mountings Cable Ties and Cable Lacing Grounding Braid, Straps Heat Shrink Boots, Caps Heat Shrink Tubing Labels, Labeling Protective Hoses, Solid Tubing, Sleeving Solder ...
DC / 1000 hours Yes > 5% > 1.5 × < 50% of min. upper limit as-delivered value value Resistance to soldering heat IEC Solder bath at +260 °C ±5°C Yes > 2% > upper < 50% of min. limit value as-delivered value 60068-2-20:2008 Endurance IEC 60384-16:2005 85 °C / 1.25 ...
Power handling •> 1 W •Measure power endurance over 4 hours (estimated talk time) using a 1 W CW signal—set the CW test signal frequency to the middle of each supporting Tx band. •Visually inspect device to ensure there is no damage to the antenna structure and matching components...
keep the processor operating, so that an interrupt service routine can perform shutdown tasks and “tidying up” before the Vcc line fails. The comparator will not turn the output (PFO) high until DC IN has risen to about 9.2 V. The hysteresis will also help prevent any system oscillation...