//the main only needs to call getDHT11(),then the temperature and huminity was geted in F16T,F16RH as float sbit bit11=P2^0; unsigned char U8T_data_H,U8T_data_L,U8RH_data_H,U8RH_data_L,U8checkdata; //用于最终读取的温湿度数据 // read 8 bits onice char COM(void) { char...
stick to 50 - it is a safe value - check the data sheet (20-40uS) 1 0 replies gfwilliams Feb 11, 2025 Maintainer Author Posted at 2016-11-21 by @gfwilliams @ClearMemory041063 I updated the module to use a 50ms timeout almost 2 weeks ago now. Are you somehow using an old ve...
the DS18B20 temperature sensor was the only one to give some “null” readings throughout the experiment. We’ve measured two DS18B20 temperature sensors in the same data line and one of the sensors
学海无涯 //DHT11.c 文件 #includereg52.h #includeTime_Delay.h //the main only needs to call get DHT11(),then the temperature and huminity was got in F16T,F16RH as float sbit bit11=P2^0; unsigned char U8T_data_H,U8T_data_L,U8RH_data_H,U8RH_data_L,U8checkdata; float F16...
Wrong baud rate or failed to upload code: if you don’t see anything in your Arduino IDE Serial Monitor double-check that you’ve selected the right baud rate, COM port or that you’ve uploaded the code successfully.While building our projects, we’ve experienced similar issues with the D...
1、/DHT11.C 文件#include#include/the main only needs to call gel DHTI l()jhen the temperature and liuminity was got inF16T.F16RH as floatsbit bitll=P2A0;unsigned char U8T_data_H,U8T_data_L.U8RI Ldata_H,USRl Ldata_L,U8checkdala;float FI6T.F16RH:川于最终读取的温湿度数据/ ...
//the main only needs to call getDHT11(),then the temperature and huminity was geted in F16T,F16RH as float sbit bit11=P2^0; unsigned char U8T_data_H,U8T_data_L,U8RH_data_H,U8RH_data_L,U8checkdata; float F16T,F16RH; //用于最终读取的温湿度数据 // read 8 bits onice char...
//the main only needs to call getDHT11(),then the temperature and huminity was geted in //F16T,F16RH as float sbit bit11=P2^0; unsigned char U8T_data_H,U8T_data_L,U8RH_data_H,U8RH_data_L,U8checkdata; //用于最终读取的温湿度数据 // read 8 bits onice char COM(void) { ch...
Any reading this, can you help? I’m trying to have my esp32s running some sort of templated API system and I am at a complete roadblock. Also tried the esp32 – microWebSrv github situation and not much better luck with that though I was able to get the API server to startup. ...