在代码里直接读FICR->DEVICEADDR寄存器将MAC地址读出来看看,代码截图如下: 从对应log 信息中打印的地址发现按6 Bytes MAC看,最高字节也是BF,而sd_ble_gap_addr_get读出的址址和手机APP上显示地址最高字节都是FF, 就这个地方存差别。 对照上面列出的地址类型进一步分析可以确定是蓝牙地址最高字节的两个bit位不同,...
the three arraysA,B, andCare allocated on the device. When the arrays are referenced in atargetregion, we use thehas_device_addr(A, B, C)clause to indicate thatA,B, andCalready have device addresses.
program test_use_device_addr implicit none type d real :: a end type d type(d) :: a real,pointer ::a_ptr call assign_ptr(a%a,a_ptr) !$omp target data use_device_addr(a_ptr) !$omp end target data call wrapper(a%a) contains subroutine wrapper(a) real :: a ...
Since my arrays are declared as allocatable or automatic arrays and not declared as C_PTR (or even Fortran pointers), it would seem the alternative would be to use "use_device_addr()"? However, using "use_device_addr()" would be a problem for portability since th...
This patch updates the omp.target_data operation to use the same formatting as map clauses on omp.target for use_device_addr and use_device_ptr. This is done so the mapping that is being enforced b...
device addrizzatrama for fabrics, with cylinder concealer to more sections operated in adjustable independently from one another.VIGNALI IVO
---。TXT 翻译结果2复制译文编辑译文朗读译文返回顶部 ___.txt 翻译结果3复制译文编辑译文朗读译文返回顶部 ___.txt 翻译结果4复制译文编辑译文朗读译文返回顶部 <项目/boardname>__ 翻译结果5复制译文编辑译文朗读译文返回顶部 ___.txt [translate] [translate...
1、首先开机连续敲击键盘上的Del或是Delete按键进入Bios，选择Integrated Pripharals中的Onboard Device 中，将LAN BOOT ROM 设置为Disabled，最后按F10保存退出即可，如下图所示：2、也有些主板是（例如:K8M800）开机连续敲击键盘上的Del或是Delete按键进入Bios，选择Integrated Pripharals进入，您会直接看到...
1/*地址结构*/2structin_ifaddr {3structhlist_node hash;4/*下一个地址节点*/5structin_ifaddr *ifa_next;6/*所属ip配置块*/7structin_device *ifa_dev;8structrcu_head rcu_head;9/*10ifa_local和ifa_address都用来存储ip地址11但在不同设备接口意义不同12(1) 在配置了广播的设备上,都表示本地ip...
DEVICE=eth0 ADDR=192.168.10.18 NETMASK=255.255.255.0 ONBOOT=yes A. 应该使用参数IPADDR代替参数ADDRB.文件中没有BOOTPROTO参数C.不应该包含DEVICE行,该设备被指定为文件名的一部分D.文件配置正确相关知识点: 试题来源: 解析 A. 应该使用参数IPADDR代替参数ADDR 反馈 收藏 ...