B) To get data in Straight Binary format, remove the jumper from pin 3 to pin 4 on P5. Factory Setting: Pin 3 jumpered to pin 4 on P5, output format is Binary Two’s Complement. NOTE: When using an external convert command, the trace powering the on-board convert command gen...
The AHN uses GeoTiff as format. The AHN NO_DATA value is set to MIN FLOAT value, some tools can't handle this value. The following GDAL tools can be useful: Use GDAL tools in docker https://github.com/geo-data/gdal-docker ...
If DHCP is not used, or a fixed address is required, adding the board to the network without assigning an address may create network conflicts. • Traffic Levels – While the on-board Ethernet controller will filter out unwanted messages, a highly loaded network with many broadcast messages ...