Current boot mode is set to UEFI.Please ensure compatible bootable media is available. Use the system setup program to change the。 8、 boot mode as needed.系统引导失败,因为 BIOS 中启用了 UEFI 引导模式,而引导操作系统并非 UEFI。请确保引导模式设置正确,并且具有正确的可引导介质。请参阅使用系统设...
install a remediated package containing the BIOS, Thunderbolt firmware, TPM firmware, or dock firmware; or update Dell Command Update, Dell Update, or Alienware Update; or install the latest version of Dell System Inventory Agent or Dell Platform Tags, The remediated dbutil driver is installed on...
2. Why does my Dell laptop keep booting to BIOS? If your Dell computer keeps booting into the BIOS, it may be caused by an incorrect boot sequence. You need to check if a suitable boot device is available in the BIOS. Please set the disk as the primary boot option. If you cannot f...
progress. Please wait BIOS Update Attempt BIOS remote update failed. Retry update. Failed Caution! NVRAM_CLR jumper NVRAM_CLR jumper is installed. Remove the NVRAM_CLR jumper. is installed on system See System Board Jumpers on board. page 115 for the jumper location. Data error Faulty ...
The BIOS has detected a stuck key. Ensure that nothing is resting on the keyboard; if a key appears to be stuck, carefully pry it up. If the problem persists, you may need to replace the keyboard. An error occurred with the keyboard connector. Ensure that nothing is resting on the ...
The Auto setting allows the operating system or the BIOS to configure the port automatically. When the option is set to Off, the port is disabled and you can use its assigned LPT resources for another device. If you change the parallel port address and/or DMA channel, be careful not...
Step 1. Restart PC and press F2/Delete to access BIOS. Step 2. Go to Advanced > M.2_2 PCIE Storage RAID Support. Step 3. Make sure it's enabled, and save the changes. Fix 2. Reinstall the NVME SSD Besides the first method, when the NVME drive not showing in BIOS, you can als...
Update the BIOS Fix 1 – Check the physical connection The first thing you need to do is check the physical damage to your docking station or the ports on your computer. Simply inspect the dock’s performance by plugging it to another laptop. If it works well and each device behaves prope...
The boot order in your computer's BIOS or UEFI firmware determines which devices the system attempts to boot from first. If the boot order is incorrect, your PC may be trying to boot from a non-bootable device, leading to the checking media fail error. Follow the below steps:...
Push the microSD securely into the SD card slot on the right hand side of your XPS 13 and fire up your computer from a cold boot. Hit F2 to enter the bios, and go to the Boot Order menu. You need to bump the SD card up to the top of the boot order, so that it boots first...