Obviously, if we stay inside that yield surface with our stress and do not bump into it, we should stay out of serious trouble. That is the topic of the next section, but let us look at one more scenario first. One of the most difficult aspects of materials that have been loaded ...
3c) throughout the entire cell surface. We refer to these protrusions as ‘FLS.’ The enlarged image (Fig. 2e) of the area inside the white rectangle in Fig. 2d (right) clearly displays FLS (green arrows), which are very similar to the protrusive cell membrane structures of SK-BR-3 ...
The primary purpose of the sheath is to maintain a close fitting bearing surface for the clip-advancing wire, although its three distinct lumina help reduce friction between all the wires. The sheath 36 preferably free floats within the tubular coil; i.e., it is not attached to the tubular...
The method involves a load relieving supporting surface increasingly bearing the load as the elastic deformation of the seat increases. The valve has a valve body (4) with a valve body seat (9) and a valve needle with a sealed guide and a valve needle seat (6) with a defined seal edge...
The method involves a load relieving supporting surface increasingly bearing the load as the elastic deformation of the seat increases. The valve has a valve body (4) with a valve body seat (9) and a valve needle with a sealed guide and a valve needle seat (6) with a defined seal edge...