Default port ranges may occasionally change (if unavoidable) as new features are developed. Our documents list the current default ports for the given version number. Note In some cases throughout this document we list port ranges...
Or, the port range that is used by the servers can be modified on each server. You adjust this range by using the netsh command, as follows: netsh int <ipv4|ipv6> set dynamic <tcp|udp> start= number num= range. This command sets the dynamic port range for TCP. The start p...
To create the default DNS application directory partitions, follow these steps: 1. Log on to your DNS server as an Enterprise Administrator. 2. To open DNS, click Start | Administrative Tools, and double-click DNS. 3. In the console tree, expand and right-click the DNS server and select...
nmap -n -vv -sU -p <port_range> <ccm_ip_address> where: -n: No DNS resolution. Tells NMAP to never do reverse DNS resolution on the active IP addresses that it finds. Because DNS can be slow even with the NMAP built-in parallel stub resolver, ...
dns.nameserver</name> <value>default</value> <description>The host name or IP address of the name server (DNS) which a region server should use to determine the host name used by the master for communication and display purposes. </description> </property> <!-- region在切分的时候的默认...
Number of consecutive test failures 1 Condition for sending a trap No trap sent in any condition Table 2-9 Default settings for an NQA trace test Parameter Default Setting Destination port number of test packets 33434 Number of probes for each hop in a trace test 3 Test packet payload size...
Specifies the minimum and maximum connection pool to be used on a specific LDAP server and port. This attribute is for LDAP and Membership authentication services only. Use the format host:port:min:max.Note – This connection pool is different from the SDK connection pool configured in server...
You can identify a domain by its distinguished name, GUID, Security Identifier (SID), DNS domain name, or NETBIOS name. You can also set the parameter to an ADDomain object variable, or pass an ADDomain object through the pipeline to the Identity parameter. For example, you can use the...
This article describes the connectivity issues that occur when multiple default gateways are used in TCP/IP configuration options. Applies to: Windows 2000 Original KB number: 159168 Summary When multiple default gateways are used in TCP/IP configuration options on a Windows NT computer, connectivit...
Select Use the following DNS server addresses. Enter the IP address of the internal interface for the ISA firewall in the Preferred DNS server text box. This is the same number you entered in step 4 in the IP address text box. Click OK in the Internet Protocol (TCP/IP) Properties dialog...