在Debian系统上配置IPv6 DHCP,可以按照以下步骤进行: 1. 确认Debian系统上是否支持IPv6 Debian系统默认支持IPv6,但可以通过以下命令确认: bash modprobe ipv6 lsmod | grep ipv6 如果看到ipv6模块已加载,说明系统支持IPv6。 2. 检查Debian系统是否已安装DHCP客户端 Debian系统通常使用isc-dhcp-client作为DHCP客户端...
一、DHCP 1、打开设备DHCP支持 [Huawei]dhcp enable 2、进入接口配置IP并设置接口的dhcp类型 类型{...
(Docker安装后)qemu网桥上的虚拟机失去ipv4连接 比如windows guest内表现为ipv6能用但收不到dhcpv4,静态ipv4地址ping通host但ping不同网关: 原因是docker会操作iptables来为自己的环境添加规则,从而引发冲突。 更详细的解释可以看这个,似乎和br_netfilter有关。 因为docker的修改发生在服务启动时,所以普通做法似乎不能...
# dhcp分配给客户端的dns服务器 dhcp-option=option:dns-server, 192.168.31.1 # MTU值 dhcp-option=option:mtu, 1500 # 动态分配ip的范围,从2~254,租约时间为10小时 dhcp-range=192.168.31.2, 192.168.31.254, 10h 更多dhcp-option的选项可以通过dnsmasq --help dhcp查询到。 /opt/router-config/dnsmasq/lan/...
Note: The Debian installer performs network configuration by IPv6 autoconfiguration and DHCP by default, if available. To force manual network configuration in the UEFI installer, pressEand addnetcfg/disable_autoconfig=trueto the Linux command line. For the BIOS installer, select theHelpentry and ...
Configure packages which require user input on installation according to your needs (e.g. Samba asking about WINS/DHCP support). If you have a mail server in your network, you should configure postfix as asatellite system, your existing mail server will then be therelay hostwhich will route ...
3、更新apt,并配置网络安装所需要的服务(DHCP、TFTP、HTTP) root@duan:~# apt-get update root@duan:~# apt-get install isc-dhcp-server tftp-hpa apache2 修改相关配置文件并重启相关服务 ### DHCP ### cat /etc/dhcp/dhcpd.conf default-lease-time 600; max-lease...
$ echo "net.ipv6.conf.all.disable_ipv6 = 0" | sudo tee --append /etc/sysctl.conf Restart the service: $ sudo service openvpn restart Watch the log: $ sudo tail -F /var/log/openvpn.log TUN/TAP device tun0 opened TUN/TAP TX queue length set to 100 do_ifconfig, tt->ipv6...
DEBUG: DHCPv6 line: nameserver[0] IPV6_ADDR_REDACTED DEBUG: DHCPv6 line: Domain search list[0] DOMAIN_REDACTED DEBUG: DHCPv6 line: end Both the DNS ipv6 address and domain have been redacted but are correct. Checking netcfg's code, I've seen that it uses either dhclient or dhcp6c (dep...
$ echo "net.ipv6.conf.all.disable_ipv6 = 0" | sudo tee --append /etc/sysctl.conf Restart the service: $ sudo service openvpn restart Watch the log: $ sudo tail -F /var/log/openvpn.log TUN/TAP device tun0 opened TUN/TAP TX queue length set to 100 do_ifconfig, tt->ipv6...