在14.0环境下重新编译并更新到SD卡中!并在inux系统下更新preloader和u-boot到SD卡中。(嵌入式linux开发的还是需要一台linux机器的,不管是虚拟机还是单独的linux系统...文件夹下会产生一个preloader_de1_soc.img。可以用于更新SD image中的preloader。 ——— DE10-Nano...
the U-Boot source code was integral to SoC EDS prior to this and later removed. To compile U-Boot 2017.03-rc2, I would have to locate an old version of SoC EDS Standard that contained U-Boot 2017.03-rc2. Then I would need to backdate my installatio...
For both the DE1-SoC and DE10-Standard V16 of the OpenCL Board Support package SD Card images from Terasic the MAC is not set in the MMC. It can be set by stopping UBOOT (by pressing a key during boot) and specifying it using setenv ethaddr xx:xx:xx:xx:xx:xx ...
Prior to the reset, U-Boot seems to function normally and I am able to execute commands from the terminal window. For reference, the DE10-Nano factory image uses U-Boot 2017.03-rc2. I understand that the U-Boot build flow changed quite recently. My ...
My hunch is that something "under-the-hood" changed along this time that is causing my build of U-Boot to behave differently. The results are the same whether I use the DE10-Nano specific build config "socfpga_cyclone5_de10_nano" or the Cyclone V ...
As described here, the U-Boot build flow changed considerably starting with SoC EDS Standard version 19.1. Furthermore, the U-Boot source code was integral to SoC EDS prior to this and later removed. To compile U-Boot 2017.03-rc2, I would have to locat...
As described here, the U-Boot build flow changed considerably starting with SoC EDS Standard version 19.1. Furthermore, the U-Boot source code was integral to SoC EDS prior to this and later removed. To compile U-Boot 2017.03-rc2, I would have to loca...
My hunch is that something "under-the-hood" changed along this time that is causing my build of U-Boot to behave differently. The results are the same whether I use the DE10-Nano specific build config "socfpga_cyclone5_de10_nano" or the Cyclone V ...
I have also tried generating the device tree blob, compiling Linux, compiling u-boot, compiling the OpenCL driver approach, without luck. Is there a pre compiled OpenCL driver or precompiled SD Card image for 19.1/19.3? I've noticed that...
Prior to the reset, U-Boot seems to function normally and I am able to execute commands from the terminal window. For reference, the DE10-Nano factory image uses U-Boot 2017.03-rc2. I understand that the U-Boot build flow changed quite recently. My ...